MIB descriptions

COLUBRIS-802DOT11-MIB

„coDot11WDSPortMacAddress

.1.3.6.1.4.1.8744.5.4.1.6.1.2

read-write

MAC address of the remote device on the other side of the local mesh link.

„coDot11WDSPortCurrentRate

.1.3.6.1.4.1.8744.5.4.1.6.1.3

read-only

Current rate of the local mesh link.

„coDot11WDSPortSNRLevel

.1.3.6.1.4.1.8744.5.4.1.6.1.4

read-only

Relative strength of the signal level compared to the noise level.

„coDot11WDSPortTxPackets

.1.3.6.1.4.1.8744.5.4.1.6.1.5

read-only

Number of packets transmitted on this local mesh link.

„coDot11WDSPortTxDropped

.1.3.6.1.4.1.8744.5.4.1.6.1.6

read-only

Number of packets that could not be transmitted on this local mesh link.

„coDot11WDSPortTxErrors

.1.3.6.1.4.1.8744.5.4.1.6.1.7

read-only

Number of packets that could not be sent due to the following reasons: Rx retry limit exceeded or Tx discarded because of wrong SA.

„coDot11WDSPortRxPackets

.1.3.6.1.4.1.8744.5.4.1.6.1.8

read-only

Number of packets received on this local mesh link.

„coDot11WDSPortRxDropped

.1.3.6.1.4.1.8744.5.4.1.6.1.9

read-only

Number of packets that were dropped on this local mesh link due to a lack of resources.

„coDot11WDSPortRxErrors

.1.3.6.1.4.1.8744.5.4.1.6.1.10

read-only

Number of packets that could not be received due to the following reasons: Rx discards WEP excluded, Rx discards WEP ICV error, Rx MSG in bad MSG fragments, Rx MSG in MSG fragments Rx WEP undecryptable, Rx FCS errors.

coDot11ScanTable

.1.3.6.1.4.1.8744.5.4.1.7not-accessible

Conceptual table for the AP scanning results. In tabular form to allow multiple instances on an agent. This table is not supported on the WCB-200.

„ coDot11ScanEntry

.1.3.6.1.4.1.8744.5.4.1.7.1

not-accessible

An Entry (conceptual row) in the AP scan Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.

coDot11ScanIndex - Uniquely identify an AP in the scan Table.

3-107