MIB descriptions

COLUBRIS-LICENSE-MIB

„coVirtualApAuthenMode

.1.3.6.1.4.1.8744.5.11.1.1.1.1.7read-only

Identifies if user authentication is performed locally or via an external authentication server.

„coVirtualApAuthenProfileIndex

.1.3.6.1.4.1.8744.5.11.1.1.1.1.8read-only

Specifies the authentication server profile to use for user authentication. This parameter only applies when the coVirtualApSecurity is set to ’wpa’ or ’ieee802dot1x’ and coVirtualApAuthenMode is set to ’profile’ or ’localAndProfile’. When set to zero, no authentication server profile is selected or on a AP it could represent a pre-configured authentication profile.

„coVirtualApUserAccountingEnabled

.1.3.6.1.4.1.8744.5.11.1.1.1.1.9read-only

Indicates if accounting information is generated by the device and sent to the authentication server for connected users. Accounting information will be generated only if a valid authentication server profile is configured for the coVirtualApAccountingProfileIndex attribute.

„coVirtualApUserAccountingProfileIndex

.1.3.6.1.4.1.8744.5.11.1.1.1.1.10read-only

Identifies the authentication server profile to be used for accounting information. The special value Zero indicates that no accounting profile is selected.

„coVirtualApDefaultUserRateLimitationEnabled

.1.3.6.1.4.1.8744.5.11.1.1.1.1.11read-only

Indicates if the default user rate limitation is enabled.

„coVirtualApDefaultUserMaxTransmitRate

.1.3.6.1.4.1.8744.5.11.1.1.1.1.12read-only

Identifies the default user maximum transmit rate.

„coVirtualApDefaultUserMaxReceiveRate

.1.3.6.1.4.1.8744.5.11.1.1.1.1.13read-only

Identifies the default user maximum receive rate.

„coVirtualApDefaultUserBandwidthLevel

.1.3.6.1.4.1.8744.5.11.1.1.1.1.14read-only

Identifies the default user bandwidth level.

„coVirtualApOperState

.1.3.6.1.4.1.8744.5.11.1.1.1.1.15read-write

Activate/Deactivate the VSC on the radio.

COLUBRIS-LICENSE-MIB

This MIB is used to view the list of licenses installed in a HP device.

3-57