HP Guest Management Software manual COLUBRIS-TOOLS-MIB Traps

MIB descriptions

COLUBRIS-TOOLS-MIB

traceNumberOfPackets

.1.3.6.1.4.1.8744.5.12.1.1.5read-write

Specifies the maximum number of packets (IP datagrams) the trace should capture. Once this limit is reached, the trace automatically stops.

tracePacketSize

.1.3.6.1.4.1.8744.5.12.1.1.6read-write

Specifies the maximum number of bytes to capture for each packet. The remaining data is discarded.

traceCaptureFilter

.1.3.6.1.4.1.8744.5.12.1.1.7read-write

Specifies the packet filter to use to capture data. The filter expression has the same format and behavior as the expression parameter used by the well-known TCPDUMP command.

traceCaptureStatus

.1.3.6.1.4.1.8744.5.12.1.1.8read-write

IP Trace tool action trigger.

’stop’: Stops the trace tool from functioning. If any capture was previously started it will end up. if no capture was started, ’stop’ has no effect.

’start’: Starts to capture the packets following the criteria specified in the management tool and in this MIB.

traceNotificationEnabled

.1.3.6.1.4.1.8744.5.12.1.1.9read-write

Specifies if IP trace notifications are generated.

COLUBRIS-TOOLS-MIB Traps

traceStatusNotification

.1.3.6.1.4.1.8744.5.12.2.0.1

Sent when the user triggers the IP Trace tool either by starting a new trace or stopping an existing session.

Parameters: traceCaptureStatus.

3-136