MIB descriptions

COLUBRIS-802DOT11-MIB

„ coDot11PHYType

.1.3.6.1.4.1.8744.5.4.3.1.1.1

read-only

This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz

= 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, OFDM 5 GHz = 04.

„coDot11CurrentRegDomain

.1.3.6.1.4.1.8744.5.4.3.1.1.2

read-only

The current regulatory domain this instance of the PMD is supporting. This object corresponds to one of the RegDomains listed in coDot11RegDomainsSupported.

„ coDot11TempType

.1.3.6.1.4.1.8744.5.4.3.1.1.3

read-only

There are different operating temperature requirements dependent on the anticipated environmental conditions. This attribute describes the current PHY’s operating temperature range capability. Currently defined values and their corresponding temperature ranges are:

Type 1 = X’01’-Commercial range of 0 to 40 degrees C,

Type 2 = X’02’-Industrial range of -30 to 70 degrees C.

„coDot11CurrentOperFrequency

.1.3.6.1.4.1.8744.5.4.3.1.1.4

read-only

The current operating frequency channel of the radio.

„coDot11CurrentOperPHYType

.1.3.6.1.4.1.8744.5.4.3.1.1.5

read-only

The current operating PHY type of the radio.

„

coDot11Sensitivity

 

 

.1.3.6.1.4.1.8744.5.4.3.1.1.6

read-write

 

Receiver sensitivity of the radio.

 

„

coDot11RadioEnabled

 

 

.1.3.6.1.4.1.8744.5.4.3.1.1.7

read-write

 

When True the radio is enabled.

 

„coDot11OperatingMode

.1.3.6.1.4.1.8744.5.4.3.1.1.8

read-write

Operating mode of the radio. Available options are:

Access point and Wireless links: Standard operating mode provides support for all wireless functions.

Access point only: Only provides access point functionality, local mesh links cannot be created.

Wireless links only: Only provides local mesh functionality. Wireless client stations cannot connect.

Monitor: Disables access point and local mesh functions. Use this option for continuous scanning across all channels in all supported wireless modes.

Sensor: Enables RF sensor functionality on this radio. Operation of this feature requires that the appropriate license is installed.

3-119