505NL_e_03.fm Page 40 Monday, July 14, 2003 2:11 PM

SMS Feature (Text Message)

Setting the PBX Line Access Number

This feature is only for the phones connected to a PBX. This allows you to delete automatically the PBX line access number (max. 4 digits) when you enter the destination phone number of an SMS outgoing message from Phonebook, Redial or Caller ID lists.

To exit the operation, press at any time.

Follow steps 1 to 3 on the previous page, then:

4

Enter 4-digit Base

5

Select “PBX Prefix”.

6

Select “On”.

Unit PIN.

 

 

 

(Factory Preset

 

 

 

 

 

0000)

 

 

 

 

7

Enter Line Access

8

Press JOYSTICK.

9

Select “Save”, then

Number.

 

Saved” is displayed.

(max. 4 digits)

Turning the SMS Feature On/Off

To exit the operation, press at any time.

Follow steps 1 to 3 on the previous page, then:

4

Enter 4-digit Base Unit

5

Select “SMS On/Off”.

6

Select “On” or

PIN.

 

Off”.

(Factory Preset 0000)

When the SMS feature is turned off;

If you send a message, a tone sounds and the message will return to the SMS incoming list with “FD” attached.

If you receive from SMS centre call, the message will not be received but SMS centre phone number will remain in the Caller ID list.

If you turn the SMS feature on, the unit will begin ringing (one ring) after other connected telephones.

The factory preset is “On”.

40

Page 46
Image 46
Panasonic KX-TCD505NL operating instructions Setting the PBX Line Access Number, Turning the SMS Feature On/Off