505NL_e.book Page 64 Thursday, July 10, 2003 4:56 PM
Multi-Unit User Operations
Cancelling a Handset
Each handset can cancel itself or another handset. This feature is usually used to cancel a link between Handset and Base Unit.
To exit the operation, press 
at any time.
1 Press JOYSTICK (or move). | 2 Select “ |
| Setting Base”. | ||
| |||||
|
|
|
|
|
|
3 Enter
5 Search and press RIGHT SOFT KEY to attach “
” the handset(s) to cancel.
4
6
Select “Cancel Handset”.
Press JOYSTICK.
Cancelling a Base Unit
If another handset is out of range and/or power is OFF when Cancelling a Handset, the previous base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base unit registered in the cancelled handset. To exit the operation, press 
at any time.
Follow steps 1 to 3 on the previous page, then:
4
6
8
Select “Cancel Base”. | 5 | Enter |
|
| (Factory Preset 0000) |
Search and press RIGHT SOFT KEY | 7 Press JOYSTICK. | |
to attach “ ” the base unit to cancel. |
|
|
Select “Yes”, then “Deleted” is displayed.
64
