––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Message Waiting

Cancelling a Calling Station Message

To cancel a message that has been set at your station

Press /&'￿0VJ￿6HOHFW

...or press a [PDN] + ￿￿￿

...or press 6SNU.

The LCD Msg Select LED goes out.

The LED lights.

The LED goes out. A personal message (10~19) remains stored in memory.

Message Waiting

If you call a station [DN] and it is busy or its user does not answer, you can leave a message waiting indication by pressing the 0VJ button. The Msg LED at the called station flashes after you press the button. The user can call you back by pushing the 0VJ button with the flashing LED. (Voice mail devices, as well as people, can leave message waiting indications.)

All telephones have a fixed 0VJ button/LED for receiving/retrieving messages left by callers that called the [PDN]. Telephones that own [PhDNs] can also have flexible message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving messages left by callers.

Each Message Waiting indication can accept up to four MW indications at each [DN] or [PhDN] at one time. One of the indications for each [DN] is reserved for the Message Center set in system programming.

To answer a Message Waiting

1.

Press 0VJ when the Msg

Your telephone rings the station or voice mail device

 

LED is flashing red. If there

that set the indication. If there is no answer, the LED

 

is no answer, hang up and try

continues to flash.

 

at a later time.

 

2.

Press 7$/. after receiving

Voice mail devices may cancel the indication after a

 

the message to terminate the

short delay.

 

call.

 

3.

Repeat the Steps to retrieve

The Msg LED flashes if you have more messages.

 

additional messages.

 

 

 

 

The called party must answer—by either going off-hook or by pressing the 6SNU button—for the indication to be cancelled automatically.

Features

67

Page 73
Image 73
Toshiba DKA-UG-CRDLS-VC 4016149 manual Cancelling a Calling Station Message, To answer a Message Waiting