–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– CO Line Access Codes
Appendix 95
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a &2 or
/LQH button, you can enter the appropriate code listed in Table 1 to access an outside line.
You can also store the code on a 6' button for one-touch access. If you are storing a CO line
access code onto a Speed Dial code, enter  before the CO access code (e.g., to store code
, enter ).
In some systems, is used as a general group code or to access Least Cost Routing (LCR).
System users are required to dial in order to access an outside line. If you press in a system
programmed with LCR, you may not hear internal dial tone, depending on system
programming.
See your System Administrator for the code which applies to your telephone.
➤To access a line
➤Press [PDN] + CO Line Access Code.
Notes
●accesses LCR or general line groups.
●a accesses line groups 1~16, respectively.
●a accesses individual lines 1~200, respectively.
Table 1 CO Line Access Codes
System CO Line Access Codes
DK14 oraora
DK16e oraor a
DK40 oraor a
DK424 (RCTUA) oraora
DK424 (RCTUBA/BB) oraora
DK424 (RCTUC/D) oraora
DK424 (RCTUE/F) oraora