Subaddress
Subaddress digits may be required for dialing another department, or to send a call to equipment, such as a printer. If you need to enter subaddress digits, follow these instructions:
➤To make an outgoing call with a subaddress to an ISDN trunk
1.Access an outside CO line
2.Dial the number.
3. | Press 6XE. | The 6XE button informs the system that the following digits |
|
| are the subaddress. |
4. | Enter the subaddress. |
|
5. | Press 6WDUW. | The dialed digits will not be sent until you press this button or |
|
| until the timer expires. |
LCD Name/Number Display
This feature enables you to use your telephone to store a title (such as your name, telephone number, location, etc.) in system memory. This title (e.g., LOBBY) displays on your station’s LCD while it is idle, and it appears at other stations’ LCDs when they are called from your station. Your name displays on other telephone LCDs when they are used to call your telephone.
Name display information for
➤To activate name/number information
1. | Press 7$/. + . | Current information appears on the display after the | |
|
| call is released. |
|
2. | Press 7$/.. | The new information is |
|
|
| stored and appears on the | T O S H I B A |
|
| display. For example, if | EXT . 200 |
|
| the name is “TOSHIBA |
|
|
| EXT. 200”, that appears | 1203 |
|
|
| |
|
| on the display. |
|
|
|
|
|
Features | 65 |
