Speed Dial –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

4.Enter the telephone number (up to 20 digits).

5.To store [DN] button access, followed by a CO Line access code before the telephone number to allow one-touch dialing of telephone numbers, See “Access Codes” on Page 92.

6.Press 5HGLDO.

Repeat this procedure to replace stored telephone numbers with new ones. To clear a Speed Dial entry, repeat this procedure, skipping Step 4.

The number is stored. The stored number is dialed when￿you press 6', or 6SHHG￿'LDO￿and the Speed Dial access code.

Stored Station or System Speed Dial Calling

You can call stored Speed Dial numbers by pressing a button or by entering a Speed Dial code. To store speed dial numbers, see the previous instructions. 6SHHG￿'LDO￿and 6' buttons are assigned to stations in system programming.

To call with a Speed Dial button

1.Access a line. (See “Access Codes” on Page 92 for information on CO Line buttons and access codes.)

2.Press 6'.

The system dials the telephone number assigned to the button.

78

Strata DK Cordless Digital Telephone 5/99

 

Page 84
Image 84
Toshiba DKA-UG-CRDLS-VC 4016149 manual Stored Station or System Speed Dial Calling, To call with a Speed Dial button