––––––––––––––––––––––––––––––––––––––––––––––––––––––– Step 3: Connect and Apply Power to Base Unit

CAUTION! Use only the AC adapter supplied with your cordless digital telephone.

2.Plug the AC adapter into a standard 120 VAC wall outlet.

3.Route the power cord where it is not a trip hazard, and where it cannot become chafed

and create a fire or electrical hazard.

4. Wrap the power cord around the notch on the bottom of the base unit as shown at the right.

5. Check to see that the power LED is on,

indicating the telephone has power.

1175

6.Before using your cordless digital telephone, be sure to raise the antenna to the vertical position.

Raise to Vertical Position

1159

Installation

19

Page 25
Image 25
Toshiba DKA-UG-CRDLS-VC 4016149 manual Raise to Vertical Position