Toshiba DKA-UG-CRDLS-VC 4016149 manual Conferencing Calls, To conference calls with stations only

Quick Reference –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

3. Announce the call.

4.Hang up

...or press /LQH, [DN] + ￿￿ to reconnect to the transferred line before the call is answered or busy tone is received.

After dialing, you hear a single tone.

Note If the call was made with Tone Signaling instead of Voice First Signaling, you hear ringing tone.

If the called station does not answer, you receive a recall ring (when your station or [DN] is idle). The ring is set by system programming.

The Line LED changes to steady when the called station connects with the transferred call.

The Line LED changes to steady red when the called station connects with the transferred call. After you hang up, the Line LED begins to flash at the on-hold rate or if you transferred the call from a [DN], the [DN] LED goes out. The CO Line or [DN] camps onto the called station and the called station receives a warning tone.

You receive a recall ring when your station or [DN]￿is idle and camp-on is cancelled when the called station user fails to answer within a predetermined time.

Repeat the procedure if necessary.

Conferencing Calls

➤To conference calls with stations only

As many as four stations can be conferenced on one [DN].

1.Press &QI￿7UQ.

2.Dial a [DN].

3.Press &QI￿7UQ￿after the party answers.

You hear internal dial tone and the LED flashes at the conference rate.

The [DN] could be for a telephone or department.

All parties are conferenced and the [DN] LED from which the conference originated lights steady.

42 Strata DK Cordless Digital Telephone 5/99