Quick Reference
Calling the Attendant Console
There are three ways to call the Attendant Console depending upon system programming. You can call any Attendant Console, a particular Attendant Console, or all Attendant Consoles.
➤ To call any console
| ➤ Press a [DN] + . | The call rings the Attendant Console. Dial 0 calls |
|
| rotate between the consoles if more than one console |
|
| is installed. |
➤ To call a specific console |
| |
| ||
➤Press a [DN] + the console’s [DN] ______.
➤To make an emergency call to all consoles
The call rings the console’s Incoming [DN] (,Q'1) button.
Note Your System Administrator can provide the Attendant Console Incoming [DNs].
➤Press [DN] + the emergency access code .
The call rings all consoles ((PJU button).
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls using rotary dial pulses on outside lines. To access remote equipment (such as an answering machine) requiring Dual- tone
➤To change to Tone Dialing
1.Dial a telephone number on a line programmed for rotary dial pulses.
2.Press 7RQH'LDO 6HOHFW while the call is in progress.
Although the line is programmed for rotary dial pulses, you can access the line and dial the telephone number like any other call described in this guide.
The Tone Dial Select LED lights steady, and you can send DTMF tones with your dial pad. If the LED is off, tone dialing is not selected, and you cannot send DTMF tones.
46 | Strata DK Cordless Digital Telephone 5/99 |
|
