![](/images/new-backgrounds/1145449/14544967x1.webp)
Draft document
Set Automatic Perforation Skip
Page/Form Layout
This command specifies the number of lines to be skipped at the bottom of each page, which creates a bottom margin.
Format | ESC | N | n |
Decimal | 27 | 78 | n |
Hexadecimal | 1B | 4E | n |
USAGE NOTES
•
•
This command remains in effect until:
–Cancel Skip Perforation (ESC O) printer command is received.
–Set Form Length in Lines (ESC C) printer command is received.
–Set Form Length in Inches (ESC C 0) printer command is received.
Valid values for n are 1 through 255 (decimal), 01 through FF (hexadecimal).
Cancel Automatic Perforation Skip
|
| This command cancels Set Automatic Perforation Skip (ESC N). |
Format | ESC | O |
Decimal | 27 | 79 |
Hexadecimal | 1B | 4F |
Proportional Space Mode
This command turns proportional space mode on and off.
Format | ESC | P | n |
Decimal | 27 | 80 | n |
Hexadecimal | 1B | 50 | n |
USAGE NOTES
•The value of n can be either of the following:
–1 (dec) 01 (hex) = ON
–0 (dec) 00 (hex) = OFF
•(259x only) ON changes character pitch to the LQ proportional mode. OFF returns character pitch in LQ mode to the pitch selected before the proportional space mode was turned on.