Lexmark 259x, 258x manual Select Print Type Style

2-27

Draft document

Select Print Type Style

This command selects the following printing modes:

•Character height - single or double

•Character width - single or double

•Line Spacing - single or double

•Italic print

•Shadow print (259x only)

•Outline print (259x only)

Format	ESC	[	@	n1	n2	m1	m2	m3	m4
Decimal	27	91	64	n1	n2	m1	0	m3	m4
Hexadecimal	1B	5B	40	n1	n2	m1	00	m3	m4

USAGE NOTES

Style Commands

•n1 and n2 specify the number of mode bytes contained in this escape sequence. Normally, n1 is 4, and n2 is 0.

•Normally, m2 is 0 (Dec) 00 (Hex). (Not supported)

•m1 controls start and stop of the character modes. See the table below for values.

•m3 controls line spacing and character height. It as two parts: a high-order half-byte and a low-order half-byte. The high-order half-byte of m3 controls the line spacing and the low-order half-byte controls the character height. See the table below for values.

•m4 controls the character width. Only the low-order half-byte is significant in this mode byte. The high-order half-byte is ignored. See the table below for values.