Lexmark 259x, 258x manual Setup Barcode Data, Barcode Control Flags

Draft document

2-41

Bar Code

Table 2-20: Barcode Length (Continued)

			V1, V2 value
	Model		Dec	Hex	Vertical Pitch
all barcodes except	24 wire (259X)	12		0C	1/180 inch
Post-Net a
	9 wire (248X)	30		1E	1/72 inch

	Model		Dec		Hex	long bar height	short bar height
Post-Net b	24 wire (259X)	288		120		24/180 inch	8/180 inch
	9 wire (248X)	270		10E		18/144 inch	6/144 inch

a. All the input data is rounded to the multiple value shown. b. Barcode height is fixed to the values shown.

Barcode Control Flag

The control flag is made up of 8 bits as follows:

Table 2-21: Barcode Control Flags

Bit	Description	Decimal	Hexadecimal	Effect
b1	Check Digit	0	00	No check code is generated by the printer.
				The host computer should generate the
				check code.
		1	01	Check code is generated automatically by
				the printer.
b2	Human Readable Character	0	00	Print On
		1	01	Print Off
b3	EAN-13 (13th digit), UPC-A	0	00	Center
	(number system character) flag
		1	01	Under
	character position
b4-b8	not used

Setup Barcode Data

This command sets the barcode data on the current printing position.

Format	ESC	[	p	n1	n2	d1	d2
Decimal	27	91	112	n1	n2	d1	d2
Hexadecimal	1B	5B	70	n1	n2	d1	d2