505NL_e.book Page 49 Thursday, July 10, 2003 4:56 PM
Handset Settings
Call Options
To exit the operation, press 
at any time.
1 | Press JOYSTICK | 2 Select “ |
| Setting | 3 Select “Call | |||
| ||||||||
| (or move). | Handset | ”. |
|
|
| Option”. | |
|
|
|
|
|
|
|
|
|
Go to step 4.
Call Bar ON/OFF
When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls to numbers assigned as emergency numbers can be made (see Setting the Emergency Calls on page 57).
Follow steps 1 to 3 shown above, then:
4 Select “Call Bar”. | 5 PIN.Enter | 6 Select “On” or “Off”. |
| (Factory Preset |
|
| 0000) |
|
•While the Call Bar mode is turned on, “
” is displayed.
Setting the Direct Call Number
After a direct call number has been set and the feature has been turned on, you can dial
only the direct call number by pressing 
or 
. When this feature is On, emergency calls cannot be made. However, incoming calls can be answered.
Follow steps 1 to 3 shown above, then:
4 | Select “Direct Call | 5 | Enter Direct Call | 6 | Press JOYSTICK. |
No.”. | Number. |
| |||
|
|
| (max. 24 digits) |
|
|
7 | Select “Save”. | 8 | Select “On”. |
|
|
Cordless Telephone
•While the direct call mode is turned on, “ 
” is displayed.
49
