|
|
| ge.com | |
|
|
|
|
|
|
| Oven Shelves |
|
|
|
|
|
| |
|
| Clean the oven shelves with an abrasive | To make the shelves slide more easily, | |
|
| cleanser or scouring pad. After cleaning, | apply a small amount of vegetable oil | |
|
| rinse the shelves with clean water and dry | to a paper towel and wipe the edges of | |
|
| with a clean cloth. | the oven shelves with the paper towel. | |
|
|
| Do not spray with Pam® or other | |
|
|
| lubricant sprays. | |
|
|
|
|
|
|
| Storage Drawer Removal |
|
|
|
| To remove the drawer: | To replace the drawer: | |
Safety Instructions Operating
Rail | Stop guide |
Pull the drawer out until it stops.
Lift the front of the drawer until the stops clear the guides.
Remove the drawer.
Place the drawer rails on the guides.
Push the drawer back until it stops.
Lift the front of the drawer and push back until the stops clear the guides.
Lower the front of the drawer and push back until it closes.
Instructions
Wire cover holder.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely.
To remove the cover:
Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.
Do not remove any screws to remove the cover.
Replace bulb with a
To replace the cover:
Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place.
Connect electrical power to the range.
Care and Cleaning
Oven Heating Elements
Do not clean the bake element or the broil | To clean the oven floor, gently lift |
element. Any soil will burn off when the | the bake element. Clean with warm |
elements are heated. | soapy water. |
21
