Billy Goat TR1304HEU Disconnect Spark Plug Wire Before Servicing Unit, Impeller Removal, Engine

Page 8

17MAINTENANCE

Use only a qualified mechanic for any adjustments, disassembly or any kind of repair .

WARNING: TO AVOID PERSONAL INJURY, ALWAYS

TURN MACHINE OFF, MAKE SURE ALL MOVING

PARTS COME TO A COMPLETE STOP.

DISCONNECT SPARK PLUG WIRE

BEFORE SERVICING UNIT.

ENGINE: See engine manufacturer operator's instructions.

RECONNECT SPARK PLUG WIRE,

GUARDS AND HOSE BEFORE START-

ING ENGINE.

Remove and Service foam air cleaner and inner air filter every 25 hours of use or every 10 hours or less for extremely dusty condi- tions (see engine manual).

Keep engine and engine cooling fins clean from dust and debris build-up.

Replace any worn or damaged parts as required.

DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately. Remove spark plug wire and check for damaged impeller, loose impeller bolt, loose impeller key or lodged foreign objects. Refer to parts list (item 16) on page 11 for proper torque specifications.

17.1IMPELLER REMOVAL

1.Wait for engine to cool and disconnect spark plug.

2.Disconnect hose from unit.

3.Remove boom assembly.

4.Remove cable assy. interlock (item 43), from front plate of assembly (item 41).

5.Remove front plate assembly (item 41).

6.Remove impeller bolt (item 16) and lock washer (item 17).

7.Pull the impeller outward. If impeller slides freely, proceed to (steps

10to 14 for TR units or to step 14 for HTR units). If not, complete steps 8 thru 9 as required.

8 . Place two crowbars between impeller and housing on opposite sides. Pry impeller away from engine until it loosens. Using a penetrating oil can help loosen a stuck impeller.

9.If the impeller does not loosen, obtain a 1” (25.4mm) longer bolt of the same diameter and thread type as the impeller bolt. Thread longer bolt by hand into the crankshaft until bolt bottoms. Using a suitable gear or wheel puller against the bolt head and the impeller back-plate (near the blades), remove impeller from shaft.

10.[TR ONLY] Remove engine base mounting bolts, and nuts.

11.[TR ONLY] Access engine bolts on inside of housing that connect engine face to the fan housing. Bend ends of lock clip away from bolt heads and remove bolts.

12.[TR ONLY] Slide engine shaft out of impeller.

13.[TR ONLY] When impeller is free of the engine shaft, align impeller with opening, and diagonally lift impeller out of housing.

14.Using a new impeller bolt and lockwasher (and engine bolt lock clip, TR only), reinstall (engine for TR only) and new impeller in reverse order.

15.Tighten impeller bolt. Torque HTR1803VEU and TR1304HEU

impeller bolt to [ 50 Ft. Lbs. (68 N.m)] and TR1104EU to [ 60 Ft. Lbs. (81.4 N.m)] (see item 16 on page 11).

16.Reinstall spark plug wire.

ENGINE

When servicing engine refer to specific manufacturers engine owner's manual. All engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available for reference(See table page 11). If you can not locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

Briggs & Stratton: 800-233-3723

American Honda: 800-426-7701

Page 8 of 12

Part No. 811237

Form No. F050304A

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Form No. F050304A Optional AccessoriesA n k Yo u f o r S e l e c t i n g Vibration Table of ContentsSound General Safety PUT OIL in Engine Before StartingParts BAG & Literature Assy P/N Instruction LabelsEngine Labels ControlsAdjusting Hose Boom Hose Operation TipsStarting Vacuuming OperationUnclogging a Clogged Housing or Exhaust Elbow OperationUnclogging a Clogged Hose Hose LifeHandling & Transporting StorageEngine Disconnect Spark Plug Wire Before Servicing UnitImpeller Removal Maintenance Maintenance OperationDate of Service Service Performed Interlock SystemParts Drawing Parts List Label Danger Keep Hands and Feet AwayTroubleshooting 120 dB

TR1304HEU, TR1104EU, HTR1803VEU specifications

The Billy Goat TR1304HEU, TR1104EU, and HTR1803VEU are high-performance outdoor power equipment designed for efficient debris and leaf management, offering unmatched reliability and ease of use for both residential and commercial users.

The TR1304HEU is a powerful specialized leaf blower, featuring a robust 130cc Honda engine. This model is known for its exceptional air volume and velocity, which can deliver air speeds of up to 200 mph. Its lightweight design allows for effortless maneuverability, reducing user fatigue during prolonged use. Additionally, the TR1304HEU includes an innovative hydrostatic drive system that allows for smooth speed control without the need for constant throttle adjustments. The self-propelling system provides precise speed control, making it suitable for tackling various terrains effortlessly.

Next, the TR1104EU model offers similar performance but is tailored for residential users seeking effective leaf and debris cleanup. Powered by a 110cc engine, this leaf blower provides a great balance of power and maneuverability. The TR1104EU is also equipped with large 10-inch rear wheels that enhance stability and facilitate easy movement across lawns and uneven surfaces. Its compact design makes it easy to store in smaller spaces, while the convenient foldable handle allows for comfortable transport and storage.

The HTR1803VEU is an advanced vacuum and chipper designed to handle larger volumes of leaves and debris effectively. Equipped with an 180cc engine, the HTR1803VEU excels in both vacuuming and chipping applications, making it an all-in-one solution for yard cleanup. It features a unique three-blade cutting system that can reduce yard waste down to a compact mulch, ideal for garden use. The innovative debris bag has a large capacity, reducing the need for frequent emptying, thereby enhancing productivity.

One of the standout features across all three models is their emphasis on operator comfort and ease of use. Each machine is designed with ergonomic handles and intuitive controls, allowing users to operate them with minimal effort. The durable construction ensures long-lasting performance, even in harsh weather conditions.

These models collectively embody Billy Goat’s commitment to quality and innovation in outdoor power equipment, providing users with dependable tools that make yard maintenance efficient and hassle-free. Whether for residential or professional use, the TR1304HEU, TR1104EU, and HTR1803VEU meet diverse needs and elevate the leaf management experience.
Top Page Image Contents