Hose Operation Tips, Starting | Billy Goat TR1304HEU, HTR1803VEU

16OPERATION

INTENDED USE: This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.

Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING.

16.6HOSE OPERATION TIPS

THE HOSE IS A REPLACEABLE WEAR ITEM.

FOR BEST HOSE OPERATION RESULTS, FOLLOW THESE RECOMMENDATIONS.

Keep hose as straight as possible during operation for best pick-up and to avoid clogs.

Avoid sharp bends in hose which will reduce efficiency and may promote clogs.

NEVER DRAG HOSE. Always remove and store hose before transporting unit.

16.1STARTING

SECURE LOADER TO TAILGATE OR MOUNTING:

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the frame (18HP Twin on engine). Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

INTAKE HOSE: Must be attached to front plate to start engine.

CHOKE: Located on engine near engine throttle panel.

STOP SWITCH: Move to on position (when provided).

THROTTLE: Move remote throttle control to fast position. Pull starting rope to start engine.

IF YOUR UNIT FAILS TO START:

fig. 1

ADJUSTING HOSE BOOM:

Properly adjusting the boom will prevent most hose clogs from occurring and will give optimum vacuum performance by keeping hose straight next to housing (see fig. 2).

See Troubleshooting on page 12.

16.2VACUUMING OPERATION

EXHAUST FLAPPER: Discharging into enclosed container, position exhaust flapper to desired opening and secure adjustment knob before starting engine. NOTE: An enclosed container must capture all debris delivered into it preventing any debris from blowing back onto unit's engine (see page 1 optional accessories).

Hose

Boom Assembly after hose has been stretched.

Hose Bands.

Stretch hose

NOZZLE: With machine running and fully assembled, move nozzle in sweeping motions over debris. For maximum pickup, move nozzle close to debris, but without blocking air flow into the nozzle (see figure 1). NOTE: Never bury nozzle into debris.

fig. 2 out before clamping.

Part No. 811237

Page 5 of 12

Form No. F050304A

TR1304HEU, TR1104EU, HTR1803VEU specifications

The Billy Goat TR1304HEU, TR1104EU, and HTR1803VEU are high-performance outdoor power equipment designed for efficient debris and leaf management, offering unmatched reliability and ease of use for both residential and commercial users.

The TR1304HEU is a powerful specialized leaf blower, featuring a robust 130cc Honda engine. This model is known for its exceptional air volume and velocity, which can deliver air speeds of up to 200 mph. Its lightweight design allows for effortless maneuverability, reducing user fatigue during prolonged use. Additionally, the TR1304HEU includes an innovative hydrostatic drive system that allows for smooth speed control without the need for constant throttle adjustments. The self-propelling system provides precise speed control, making it suitable for tackling various terrains effortlessly.

Next, the TR1104EU model offers similar performance but is tailored for residential users seeking effective leaf and debris cleanup. Powered by a 110cc engine, this leaf blower provides a great balance of power and maneuverability. The TR1104EU is also equipped with large 10-inch rear wheels that enhance stability and facilitate easy movement across lawns and uneven surfaces. Its compact design makes it easy to store in smaller spaces, while the convenient foldable handle allows for comfortable transport and storage.

The HTR1803VEU is an advanced vacuum and chipper designed to handle larger volumes of leaves and debris effectively. Equipped with an 180cc engine, the HTR1803VEU excels in both vacuuming and chipping applications, making it an all-in-one solution for yard cleanup. It features a unique three-blade cutting system that can reduce yard waste down to a compact mulch, ideal for garden use. The innovative debris bag has a large capacity, reducing the need for frequent emptying, thereby enhancing productivity.

One of the standout features across all three models is their emphasis on operator comfort and ease of use. Each machine is designed with ergonomic handles and intuitive controls, allowing users to operate them with minimal effort. The durable construction ensures long-lasting performance, even in harsh weather conditions.

These models collectively embody Billy Goat’s commitment to quality and innovation in outdoor power equipment, providing users with dependable tools that make yard maintenance efficient and hassle-free. Whether for residential or professional use, the TR1304HEU, TR1104EU, and HTR1803VEU meet diverse needs and elevate the leaf management experience.