Billy Goat F012507A owner manual Periodic Maintenance, Impeller Removal

Page 18

MV650H PUSH Vacuum Owner’s Manual

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation

Every Use

Daily or Every 5

Every 25 Hours

Every 50

Every 100-150

 

 

Hours

 

Hours

Hours

 

 

 

 

 

 

Inspect for worn or damaged parts.

z

 

 

 

 

 

 

 

 

 

 

Check for excessive vibration

 

z

 

 

 

 

 

 

 

 

 

Inspect for loose parts.

 

z

 

 

 

 

 

 

 

 

 

Clean Debris Bag

z

 

 

 

 

 

 

 

 

 

 

Lubricate throttle control cable and linkage.

 

 

z

 

 

NOTE: Use white lithium grease or equivalent

 

 

 

 

 

 

 

 

 

 

 

IMPELLER REMOVAL

READ all safety instructions before servicing unit.

DISCONNECT spark plug wire before servicing unit.

Tools required:

-1/2” socket, 3/8” drive and 3/8” ratchet

-drive extension, 3/8” drive

-universal joint, 3/8” drive

-pry bar or long screwdriver

-jack stands or similar device adequate to support weight of machine.

1.Wait for engine to cool and disconnect spark plug.

2.Drain fuel and oil from the engine.

3.Remove engine, impeller and mounting plate by removing bolts around outside of housing.

4.Leaving engine fastened to plate, remove impeller bolt and lock washer and slide impeller off crankshaft

(A puller may be required).

CAUTION: Do not drop impeller.

5.If impeller does not slide off crankshaft, place two crowbars between impeller and housing on opposite sides. Pry impeller away from engine until it loosens. Using a penetrating oil can help loosen a stuck impeller.

6.If the impeller cannot be loosened, obtain a 3/8-24x3 ¾” longer bolt of the same diameter and thread type as the impeller bolt. Invert engine and impeller and support engine above ground to prevent recoil damage. Thread longer bolt by hand into the crankshaft until bolt bottoms. Using a suitable gear or wheel puller against the bolt head and the impeller back-plate (near the blades), remove impeller from shaft.

7.To reinstall impeller, use a new impeller bolt and lockwasher

8.Tighten impeller bolt. Torque impeller bolt to 50 Ft. Lbs. (68 N.m).

9.Reinstall engine, impeller, and mounting plate onto housing in reverse order of removal.

10.Before connecting spark plug wire, slowly pull engine starting rope to insure that impeller rotates freely.

11.Reconnect spark plug wire.

Part No 840186

18

Form No F012507A

Image 18
Contents Billy Goat MV650H Push Vacuum Contents About this ManualMV 650 Series Specifications Common Replacement PartsSerial Plate Data General Safety Instructions and Symbols Form No F012507A Sound Data Vibration DataIntended USE Instruction Labels Engine LabelsMV Vacuum Assembly Drawing Parts List Assembly Instructions 1stHere Operation Operator Controls StartingVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Clearing a Clogged Nozzle Vacuuming OperationShut Down Debris BAGHandling and Transporting StorageMaintenance Periodic MaintenanceImpeller Removal Troubleshooting Wiring DiagramsEngine Maintenance and Repair Warranty Claim ProcedureMaintenance Record Illustrated Parts List Nozzle Assembly Parts List PartItem no Number Description QTY Engine Assembly Engine Assembly Parts List Description QTYHood Assembly Hood Assembly Rear Axle Assembly Parts List Number Description QTY

F012507A specifications

The Billy Goat F012507A is a versatile and robust outdoor equipment model that has made a name for itself in the realm of lawn and garden care. Specially engineered for efficient clearing of debris, leaves, and grass clippings, this machine is particularly popular among professional landscapers and homeowners alike. Its compact design and powerful performance make it an ideal choice for anyone looking to maintain a pristine outdoor environment.

One of the standout features of the Billy Goat F012507A is its powerful 5.5 horsepower engine. This robust motor ensures that the machine operates smoothly, even in challenging conditions. With its high torque and fast RPM capabilities, the engine provides the necessary power to tackle tough jobs, such as clearing dense foliage and heavy debris. The unit’s ease of use is further enhanced by its lightweight construction, allowing for easy maneuverability around tight corners and tricky landscape areas.

The F012507A features a unique self-propelling design, which significantly reduces user fatigue. Users can control the speed with ease, ensuring that they can work at a comfortable pace without sacrificing efficiency. This is particularly beneficial for larger areas that require extended periods of operation. The machine is equipped with rear-wheel drive and has adjustable height options, allowing users to customize the cutting height based on their specific needs.

In terms of technology, the Billy Goat F012507A comes with an advanced debris collection system. The incorporated vacuum technology effectively picks up a wide variety of material, including leaves, grass, and small sticks. The machine's unique impeller design aids in reducing the volume of collected debris, allowing for more efficient collection and less frequent emptying. Moreover, the durable build quality of the machine ensures longevity, making it a worthy investment for both commercial and residential users.

Another characteristic that sets the Billy Goat F012507A apart is its user-friendly design. It features easy-start technology that minimizes the effort needed for ignition, allowing users to begin work quickly. Maintenance is also straightforward, with accessible components for oil changes and spark plug replacements.

In conclusion, the Billy Goat F012507A is an exceptional piece of equipment that combines power, efficiency, and ease of use. With its thoughtful design and advanced features, it serves as a reliable solution for anyone looking to enhance their outdoor maintenance routine. Whether for professional landscaping purposes or keeping a residential lawn tidy, the Billy Goat F012507A stands out as a top choice in its category.