HOW to USE the Maintenance Mode

The console features a maintenance mode that allows you to calibrate the incline and speed of the treadmill, restore factory defaults, calibrate the screen, update the console software, and view technical information.

1.Select the settings mode. See step 1 on page 22.

2.Select the maintenance mode. Press the Maintenance button in the lower right corner of the screen to

enter the maintenance mode.

3.Calibrate the incline system of the treadmill. Press the Calibrate Incline button. The frame will move upward and downward. This will calibrate the incline system. Press the Begin button to calibrate the incline system, or press the Cancel button to return to the maintenance mode. When the incline system is calibrated, press the Back button.

IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline sys- tem is calibrating. In an emergency, pull the key from the console to stop the calibration.

4.Restore factory defaults.

If necessary, press the Restore Defaults button to reset the firmware to the original factory firmware. This will erase all firmware updates that you have downloaded. Press the Begin button to restore the default firmware, or press the Cancel button to re- turn to the maintenance mode.

When the restoration is complete, the words PLEASE CYCLE POWER will appear in the grey box. Press the power switch into the off position, wait for several seconds, and then press the power switch into the reset position. The start menu will appear when the console is ready for use.

5.Calibrate the screen.

If the screen is not properly calibrated, it will be dif- ficult for you to press the buttons on the screen. To calibrate the screen, press the Calibrate Screen button and then press the Begin button. Press the Cancel button to return to the maintenance mode. Using a pencil eraser or other small object, press the center of the small target on the screen. Then, press the next two targets. After several seconds, the console will return to the start menu.

6.Calibrate the speed of the treadmill. Calibrate the speed of the treadmill only if in- structed to do so by an authorized service repre- sentative.

Note: The Calibrate Speed button may not be en- abled on your treadmill.

7.Update the console firmware.

For the best results, regularly check for firmware updates.

Press the Firmware Update button. Press the Begin button to check for updates, or press the Cancel button to return to the maintenance mode. A status bar will appear in the grey box on the screen. When the update is complete, the words PLEASE CYCLE POWER will appear in the grey box. Press the power switch into the off position, wait for several seconds, and then press the power switch into the reset position. The start menu will appear when the console is ready for use.

8.View technical information.

Press the Technical Info button to view the total number of hours that the treadmill has been used and the total number of miles that the walking belt has moved. After you view the information, press the Finish button.

9.Exit the maintenance mode.

To exit the maintenance mode, press the Back but- ton repeatedly.

PFTL01411.0 specifications

The ProForm PFTL01411.0 Treadmill is an exceptional fitness machine designed for individuals looking to enhance their cardiovascular health and overall fitness level. Built with a sturdy frame and advanced technology, it is perfect for both beginners and seasoned runners seeking to improve their running experience.

One of the standout features of the ProForm PFTL01411.0 is its powerful motor, offering a robust performance that can reach speeds of up to 10 miles per hour. This allows users to set and achieve their desired workout intensity, whether they are walking for health or engaging in high-energy running sessions. The motor is designed to be quiet and efficient, ensuring a seamless experience during workouts.

The treadmill boasts an impressive incline range of 0 to 10 percent, allowing users to simulate outdoor terrain and intensify their workouts. This feature not only increases calorie burn but also helps in building lean muscle mass and enhancing endurance. Users can easily adjust the incline at the push of a button, providing a highly customizable workout experience.

A large, 6-inch backlit display sits in the center of the console, providing essential workout metrics such as speed, distance, time, and calories burned. This intuitive display helps users stay informed and motivated throughout their routine. Additionally, the treadmill is equipped with 16 pre-set workout programs, catering to all fitness levels and helping users achieve their fitness goals with guided workouts.

Comfort is a key aspect of the ProForm PFTL01411.0. The treadmill features a cushioned running surface, which reduces impact on joints, providing a safer and more comfortable running experience. This is particularly beneficial for those recovering from injuries or starting a new fitness regimen.

Another notable characteristic is the iFit compatibility. With an iFit subscription, users can access a vast library of interactive training programs, including live workouts led by professional trainers. The treadmill can automatically adjust speed and incline to match the workout, creating a dynamic and engaging fitness experience right from home.

In summary, the ProForm PFTL01411.0 Treadmill combines advanced technology, user-friendly features, and superior comfort, making it an excellent choice for anyone looking to improve their fitness. Its blend of power, adaptability, and innovative features offers users a comprehensive solution for their workout needs, whether they're taking their first steps into fitness or pushing toward personal records.

ProForm PFTL01411.0 warranty HOW to USE the Maintenance Mode, Calibrate the screen

Models: PFTL01411.0