Assembly, Operation, Handling & Transporting

HTR/TR Owner’s Manual

ASSEMBLY

1.ASSEMBLE exhaust elbow (item 10), to main unit and firmly tighten knobs (item 90), that are preassembled to main unit.

2.SECURELY ATTACH unit to tailgate of a truck or to a trailer, so that the exhaust discharges into an enclosed container.

3.ATTACH hose to hose coupler (item 24), using hose clamp (item 60)

4.ASSEMBLE hose coupler to housing of main unit and securely tighten knob (item 13), that is preassembled to housing front plate.

5.ASSEMBLE nozzle handle loop (item 82), to nozzle handle using screw (item 80), washer (item 6) and lock nut (item 5). Adjust handle loop to desired height and angle and securely tighten in place.

6.ASSEMBLE nozzle handle (item 78), to nozzle (item 77), using screws (item 80), washers (item 79), washers (item 4) and lock nuts (item 5).

7.ATTACH assembled nozzle to hose using hose clamp (item 60). Before tightening hose clamp, position nozzle handle upward when hose is stretched to prevent twisting load on hose assembly during operation.

8.ASSEMBLE tube square boom (item 51), to boom pivot (item 50), using chain loop assembly (item 54), washers (item 4) and lock nut (item 52).

9.ASSEMBLE remaining chain loop assembly (item 54), to end of tube square boom (item 51) using washer (item 4) and lock nut (item 52).

10.SLIDE boom assembly into square tube on front of housing.

11.ASSEMBLE hose bands (item 56) around hose and onto chain loop assemblies on boom assembly using screws (item 55) and lock nuts (item 52) (see ADJUSTING HOSE BOOM on page 10).

OPERATION

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

STARTING

SECURE LOADER TO TAILGATE OR MOUNTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the frame (18HP Twin on engine). Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

INTAKE HOSE: Must be attached to front plate to start engine.

CHOKE: Located on engine near engine throttle panel.

STOP SWITCH: Move to on position (when provided).

THROTTLE: Move remote throttle control to fast position. Pull starting rope to start engine.

IF YOUR UNIT FAILS TO START: See Troubleshooting on page 12.

HANDLING & TRANSPORTING:

ALWAYS REMOVE LOADER FROM TAILGATE OR MOUNTING BEFORE TRANSPORTING OR OPENING TAILGATE. Using two people to lift machine is recommended. Lift holding the rear handle and front of frame. Secure in place during transport. See page 3 for weight specifications.

HOSE: DO NOT drag the hose with vehicle.

Never lift the machine while the engine is running.

Part No 811202

Form No F071408A

TR1204L specifications

The Billy Goat TR1204L is a highly regarded debris loader that stands out in the landscaping and grounds maintenance industry. Designed for efficiency and ease of use, this compact yet powerful vacuuming machine is perfect for professional landscapers, contractors, and anyone in need of serious cleanup capabilities.

One of the key features of the TR1204L is its robust 29 HP Briggs & Stratton Vanguard engine. This powerful engine provides the necessary muscle for tackling tough debris loads, whether it's leaves, grass clippings, or other yard waste. The engine is paired with a quick-attach discharge hose that enables operators to easily switch between collection and discharge modes, maximizing productivity.

The TR1204L is equipped with a 12-inch diameter, high-density polyethylene impeller that ensures efficient airflow and material breakdown. The impeller design allows for superior suction power, making it easy to pick up large volumes of debris without clogging. Additionally, the vacuum is designed with a unique "Easy-Pull" feature, which allows users to easily maneuver and position the machine with minimal effort, enhancing the overall user experience.

Another notable characteristic is the machine's large capacity debris collection bag, which significantly reduces the need for frequent emptying during operation. The bag can hold up to 340 gallons, allowing for extended use in larger landscapes or commercial properties without interruption. The TR1204L also features a convenient dump mechanism that makes emptying the bag quick and effortless.

The design of the Billy Goat TR1204L prioritizes operator comfort with features such as an adjustable handle, which allows users to customize the height for better control and ergonomics. The low center of gravity enhances stability, further improving handling on uneven terrains.

Safety is another important aspect of the TR1204L. It is built with various safety features, including a protective grill that prevents debris from escaping and ensures that users are protected during operation.

In summary, the Billy Goat TR1204L is an exemplary model of a debris loader that combines power, efficiency, and user-friendly features. Its robust engine, innovative design, and large capacity make it an essential tool for anyone looking to keep their outdoor spaces tidy and well-maintained. Whether for residential, commercial, or municipal use, the TR1204L promises to deliver reliable performance and exceptional results.