Vacuuming Operation, Hose Operation Tips

HTR/TR Owner’s Manual

VACUUMING OPERATION

EXHAUST FLAPPER: Discharging into enclosed container, position exhaust flapper

to desired opening and secure adjustment knob before starting engine. NOTE: An enclosed container must capture all debris delivered into it preventing any debris from blowing back onto unit's engine (see page 1 optional accessories).

NOZZLE: With machine running and fully assembled, move nozzle in sweeping motions over debris. For maximum pickup, move nozzle close to debris, but without blocking airflow into the nozzle (see figure 1). NOTE: Never bury nozzle into debris.

HOSE OPERATION TIPS

THE HOSE IS A REPLACEABLE WEAR ITEM.

FOR BEST HOSE OPERATION RESULTS, FOLLOW THESE

RECOMMENDATIONS.

Keep hose as straight as possible during operation for best pick-up and to avoid clogs.

Avoid sharp bends in hose, which will reduce efficiency and may promote clogs. NEVER DRAG HOSE. Always remove and store hose before transporting unit.

ADJUSTING HOSE BOOM

Properly adjusting the boom will prevent most hose clogs from occurring and will give optimum vacuum performance by keeping hose straight next to housing (see fig. 2).

UNCLOGGING A CLOGGED HOSE

With engine running and unit secured to tailgate, fully stretch hose in a straight line to dislodge the clog. If the clog will not clear, turn unit off, and allow engine to come to a complete stop. Remove hose and manually clear hose clog.

Fig. 2

Hose

Fig. 1

Boom Assembly after hose has been stretched

Hose Bands. Stretch hose out before clamping

UNCLOGGING A CLOGGED HOUSING OR EXHAUST ELBOW

Turn engine off and wait for impeller to come to a complete stop. Disconnect spark plug wire. Danger, the clog may contain sharp materials. Wearing durable gloves, clear the clog. Reconnect spark plug wire.

HOSE LIFE

To increase hose life, periodically rotate hose and reposition nozzle and coupler on front plate of unit. This increases hose life by keeping hose from wearing only on one side.

HEAVY DEBRIS REMOVAL

TILT NOZZLE FORWARD TO PICK UP DIFFICULT DEBRIS.

STORAGE

Turn fuel supply off when unit is not in use.

Fig. 3

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Be sure engine is cool. Do not smoke. Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Run engine until fuel tank is empty and engine runs out of gasoline.

NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 min. after adding stabilizer to allow it to reach the carburetor. HOSE STORAGE: Storing hose in a covered area, out of sunlight and heat will prolong hose life. Do not store hose where it could be stepped on or where other objects could crush or damage hose.

Part No 811202

Form No F071408A

TR1204L specifications

The Billy Goat TR1204L is a highly regarded debris loader that stands out in the landscaping and grounds maintenance industry. Designed for efficiency and ease of use, this compact yet powerful vacuuming machine is perfect for professional landscapers, contractors, and anyone in need of serious cleanup capabilities.

One of the key features of the TR1204L is its robust 29 HP Briggs & Stratton Vanguard engine. This powerful engine provides the necessary muscle for tackling tough debris loads, whether it's leaves, grass clippings, or other yard waste. The engine is paired with a quick-attach discharge hose that enables operators to easily switch between collection and discharge modes, maximizing productivity.

The TR1204L is equipped with a 12-inch diameter, high-density polyethylene impeller that ensures efficient airflow and material breakdown. The impeller design allows for superior suction power, making it easy to pick up large volumes of debris without clogging. Additionally, the vacuum is designed with a unique "Easy-Pull" feature, which allows users to easily maneuver and position the machine with minimal effort, enhancing the overall user experience.

Another notable characteristic is the machine's large capacity debris collection bag, which significantly reduces the need for frequent emptying during operation. The bag can hold up to 340 gallons, allowing for extended use in larger landscapes or commercial properties without interruption. The TR1204L also features a convenient dump mechanism that makes emptying the bag quick and effortless.

The design of the Billy Goat TR1204L prioritizes operator comfort with features such as an adjustable handle, which allows users to customize the height for better control and ergonomics. The low center of gravity enhances stability, further improving handling on uneven terrains.

Safety is another important aspect of the TR1204L. It is built with various safety features, including a protective grill that prevents debris from escaping and ensures that users are protected during operation.

In summary, the Billy Goat TR1204L is an exemplary model of a debris loader that combines power, efficiency, and user-friendly features. Its robust engine, innovative design, and large capacity make it an essential tool for anyone looking to keep their outdoor spaces tidy and well-maintained. Whether for residential, commercial, or municipal use, the TR1204L promises to deliver reliable performance and exceptional results.