Power Venter from Tjernlund Vent Terminal

Power Vent Kits for Gas Commercial Water Heaters

Power Venter (from Tjernlund)

Vent Terminal

Manufactured by Tjernlund Products,* Rheem-Ruud commercial gas water heater power vent kits are your best choice for new construction, electric-to-gas conversions and renovations.

Construction Features:

•Certified for use on natural and propane gas models.

•Maximum venting length up to 50 feet equivalent including the vent terminal.

•Vent terminal can be installed through combustible or non-combustible surfaces – heat shield is provided.

•Vent terminal is constructed from heavy-duty corrosion resistant aluminum.

•Venter can be connected to a vent termination on an exterior wall.

•Vibration isolators are supplied to provide quiet operation.

•Safety interlocks standard.

•Complete with mounting hardware.

•Venter is pre-wired with 40 feet of #18-4 copper wire (24 volt) to minimize field connections.

Certifications and Ratings:

•Power vent kits manufactured by Tjernlund Products, Inc. are tested and certified by AGA for use on Rheem-Ruud commercial gas heaters.

Not for use with GN, GP or GX models.

*For technical assistance, please call the Tjernlund Help Line at

1-800-255-4208

Continued on reverse.