Care and cleaning of the water heater, Housekeeping

Instructions

Care and cleaning of the water heater.

Draining the Water Heater

Installation Instructions Safety

CAUTION: Shut off gas to the water heater at the thermostat gas cock or manual shut-off valve before draining water.

DANGER: Before manually operating the relief valve, make certain no one will be exposed to the hot water released by the valve. The water drained from the tank may be hot enough to present a scald hazard and should be directed to a suitable drain to prevent injury or damage.

In order to drain the water heater, turn off the cold water supply. Open a hot water faucet or lift the handle on the relief valve to admit air to the tank.

Attach a garden hose to the drain valve on the water heater and direct the stream of water to a drain. Open the valve.

DANGER: Before manually operating the

Routine Preventative Maintenance

Troubleshooting Tips Care and Cleaning Operating Instructions

relief valve, make certain no one will be exposed to the danger of coming in contact with the hot water released by the valve. The water may be hot enough to create a scald hazard. The water should be released into a suitable drain to prevent injury or property damage.

Properly maintained, your water heater will provide years of dependable trouble- free service.

It is suggested that a routine preventive maintenance program be established and followed by the user.

It is further recommended that a periodic inspection of the thermostat, burner, relief valve, internal flue-way and venting system should be made by service personnel qualified in gas appliance repair.

At least once a year, lift and release the lever handle on the temperature pressure relief valve, located near the top of the water heater, to make certain the valve operates freely. Allow several gallons to flush through the discharge line to an open drain.

NOTE: If the temperature and pressure relief valve on the hot water heater discharges periodically, this may be due to thermal expansion in a closed water system. Contact the water supplier or your plumbing contractor on how to correct this. Do not plug the relief valve outlet.

A water heater’s tank can act as a setting basin for solids suspended in the water. It is therefore not uncommon for hard water deposits to accumulate in the bottom of the tank. It is suggested that a few quarts of water be drained from the water heater’s tank every month to clean the tank of these deposits.

Rapid closing of faucets or solenoid valves in automatic water using appliances can cause a banging noise heard in a water pipe. Strategically located risers in the water pipe system or water hammer arresting devices can be used to minimize the problem.

The anode rod should be removed from the water heater’s tank annually for inspection and replaced when more than 6″ of core wire is exposed at either end of the rod.

Make sure the cold water supply is turned off before removing anode rod.

Customer Service

	Housekeeping
	Vacuum around the base of the water
	heater for dust, dirt and lint on a
	regular basis.
	To insure sufficient ventilation and
18	combustion air supply, proper clearances
18	must be maintained.

DANGER: Combustible materials, such as clothing, cleaning materials, or flammable liquids, etc., must not be placed against or next to the water heater.

HG specifications

Rheem HG is a groundbreaking water heating solution designed to meet the needs of modern households and commercial spaces. Known for its efficiency and reliability, the Rheem HG product line integrates advanced technologies and innovative features, making it a standout choice in the competitive water heater market.

One of the primary features of the Rheem HG series is its energy efficiency. With an impressive Energy Factor (EF) rating, these water heaters utilize cutting-edge heat pump technology to extract heat from the air, significantly reducing the amount of electricity required to heat water. This efficient operation not only leads to lower utility bills but also contributes to environmental sustainability.

The Rheem HG series is equipped with smart technology, allowing users to monitor and control their water heating system remotely. Through a user-friendly mobile app, homeowners can adjust temperature settings, receive maintenance alerts, and track energy usage, ensuring optimal performance and peace of mind. This connectivity feature exemplifies Rheem’s commitment to integrating the latest smart home technologies into its products.

In addition to energy efficiency and smart features, Rheem HG is designed with durability in mind. Built with high-quality materials, these water heaters are resistant to corrosion and have extended warranties that reflect their reliability. The innovative construction also includes advanced insulation, which minimizes heat loss, ensuring that hot water is readily available whenever needed.

Another significant characteristic of the Rheem HG series is its versatility. Available in various sizes and capacities, these water heaters can accommodate the hot water demands of different households, from small apartments to larger homes. The flexibility in installation options, including both indoor and outdoor configurations, makes it easier for homeowners to find a solution that fits their specific requirements.

Safety features are paramount in the design of the Rheem HG series. Equipped with advanced leak detection systems, automatic shut-off mechanisms, and enhanced temperature control, these water heaters prioritize the safety of users while delivering consistent performance.

In summary, Rheem HG represents a fusion of energy efficiency, modern technology, durability, versatility, and safety. With its commitment to innovation and sustainability, Rheem continues to be a leader in the water heating industry, providing solutions that cater to the evolving needs of today’s consumers. Choosing a Rheem HG water heater not only guarantees high performance but also supports a greener future.