Venting System Inspection, Burner Inspection, Anode Rod

Venting System Inspection

The water heater’s internal flue must be inspected annually to be certain it is clean by removing the draft hood and flue baffle.

When reinstalling the flue baffle make certain it is hung securely by its hanger at the top of the flue way.

Remove any scale that may have fallen on the burner or floor shield and reinstall the draft hood.

Inspect the gas venting system and the chimney.

Make certain the vent connector from the draft hood to the chimney is properly positioned and securely attached.

If after inspection of the vent system you found sooting or deterioration call the local gas utility to correct the problem and clean or replace the flue and venting before resuming operation

of the water heater.

Safety Instructions Installation Instructions

Proper burner and pilot flame pattern.

Burner Inspection

Visually inspect the burners annually.

Inspect the main burner while firing and pilot burner flame with the main burner off.

If any unusual burner operation is noted, the water heater should be shut off until qualified service assistance can be obtained.

For cleaning, remove the burner from the water heater. A vacuum cleaner can be used on the burner and floor shield inside the water heater. The burner can also be cleaned by scrubbing with mild detergent.

CAUTION: For your safety, cleaning of the main burner should be performed only by qualified service personnel.

Operating Instructions Care and

Vacation and Extended Shut-Down

Cleaning

NOTE: Refer to the Hydrogen Gas Caution in the Operating Instructions.

If the water heater is to remain idle for an extended period of time, the power and water to the appliance should be turned off to conserve energy and prevent a build-up of dangerous hydrogen gas.

The water heater and piping should be drained if they might be subjected to freezing temperatures.

After a long shut-down period, the water heater’s operation and controls should be checked by qualified service personnel. Make certain the water heater is completely filled again before placing it in operation.

Troubleshooting Tips

NOTE: Do not remove the anode rod from the water heater’s tank, except for inspection and/or replacement, as permanent removal will shorten the life of the glass lined tank and affect the water heater warranty.

Anode Rod

This water heater is equipped with an anode rod designed to prolong the life of the glass lined tank. The anode rode is slowly consumed cathodically, thereby eliminating or minimizing corrosion of the glass lined tank.

Water sometimes contains a high sulfate and/or mineral content and together with cathodic protection process can produce a hydrogen sulfide, or rotten egg odor in the heated water. Chlorination of the water supply should minimize the problem.

Customer Service

HG specifications

Rheem HG is a groundbreaking water heating solution designed to meet the needs of modern households and commercial spaces. Known for its efficiency and reliability, the Rheem HG product line integrates advanced technologies and innovative features, making it a standout choice in the competitive water heater market.

One of the primary features of the Rheem HG series is its energy efficiency. With an impressive Energy Factor (EF) rating, these water heaters utilize cutting-edge heat pump technology to extract heat from the air, significantly reducing the amount of electricity required to heat water. This efficient operation not only leads to lower utility bills but also contributes to environmental sustainability.

The Rheem HG series is equipped with smart technology, allowing users to monitor and control their water heating system remotely. Through a user-friendly mobile app, homeowners can adjust temperature settings, receive maintenance alerts, and track energy usage, ensuring optimal performance and peace of mind. This connectivity feature exemplifies Rheem’s commitment to integrating the latest smart home technologies into its products.

In addition to energy efficiency and smart features, Rheem HG is designed with durability in mind. Built with high-quality materials, these water heaters are resistant to corrosion and have extended warranties that reflect their reliability. The innovative construction also includes advanced insulation, which minimizes heat loss, ensuring that hot water is readily available whenever needed.

Another significant characteristic of the Rheem HG series is its versatility. Available in various sizes and capacities, these water heaters can accommodate the hot water demands of different households, from small apartments to larger homes. The flexibility in installation options, including both indoor and outdoor configurations, makes it easier for homeowners to find a solution that fits their specific requirements.

Safety features are paramount in the design of the Rheem HG series. Equipped with advanced leak detection systems, automatic shut-off mechanisms, and enhanced temperature control, these water heaters prioritize the safety of users while delivering consistent performance.

In summary, Rheem HG represents a fusion of energy efficiency, modern technology, durability, versatility, and safety. With its commitment to innovation and sustainability, Rheem continues to be a leader in the water heating industry, providing solutions that cater to the evolving needs of today’s consumers. Choosing a Rheem HG water heater not only guarantees high performance but also supports a greener future.