Use and Operation cont.
Follow these simple steps for using Hot Water on DemandTM unit Complete
CAUTION
Be cautious before plunging your hands into a basin of water by testing the temperature first.
NOTE: Check electrical and quick connector before using Hot Water on DemandTM unit.
Electrical Connection
Quick Connector
For Unheated Water:
•Rotate the faucet outward (Fig. 8).
•Push and turn the control knob counterclockwise and position the knob at the “cool” setting (Fig. 9).
•You can release the knob while unheated water is pumping.
• Turn the knob clockwise to turn the water heater “off” (Fig. 10).
•The resulting output water temperature will be the same temperature as your source water.
•Hot Water on DemandTM unit will not cool water to a temperature lower than your source water in the cool setting.
|
|
|
Fig. 9 |
| Fig. 10 |
| ||
|
|
|
For Warm Water
•Rotate the faucet outward (Fig. 11).
•Push and turn the control knob counter- clockwise and position the knob at the “warm” setting that is comfort- able for you (Fig. 12).
•You can release the
knob while warm water is pumping.
•Turn the knob clockwise to turn the water heater “off” (Fig.13).
•The resulting output water temperature is dependent on the temperature of your source water.
•Hot Water on DemandTM unit will maintain a constant temperature once you select the setting.
•Hot Water on DemandTM unit will not increase the water temperature more than 55° over the temperature of the source water in the warm setting.
|
|
|
Fig. 12 |
| Fig. 13 |
| ||
|
|
|
For Hotter Water
•Rotate the faucet out- ward (Fig. 14).
•Push and turn the control knob counter- clockwise.
•To reach the hottest water temperature, the knob must be held
counterclockwise with one hand all the way
to the “hot” setting (Fig. 15).
•When the water has reached your desired temperature, place your cup or mug underneath the faucet.
•When you release the knob, the water heater will automatically reset to warm or you can turn the knob clockwise to turn the water heater “off” (Fig. 16).
•Hot Water on DemandTM unit will not increase the water temperature more than 100° over the temperature of the source water in the “Hot” setting.
Fig. 15 | Fig. 16 |
7