Bosch Appliances GWH-345/450-ESR-L, GWH-345/450-ESR-N instruction

Appliance details

2.4General rules to follow for safe operation

1.You must follow these instructions when you install your heater. In the United States: The installation must conform with local codes or, in the absence of local codes, the National Fuel Gas Code ANSI Z223.1/NFPA 54.

In Canada: The Installation must conform with CGA B149.(1,2) INSTALLATION CODES and /or local installation codes.

2.Carefully plan where you install the heater. Correct combustion air supply and vent pipe installation are very important. If not installed correctly, fatal accidents can be caused by lack of air, carbon monoxide poisoning or fire.

3.When the unit is installed indoors with ROOM SEALED (twin pipe) combustion air and venting, it is permitted to be located in bathrooms, bedrooms and occupied rooms that are normally kept closed. See chapter 3.6. If the unit will be installed indoors and use indoor combustion air, the place where you install the heater must have enough ventilation. The National Fire Codes do not allow UNSEALED gas fired water heater installations in bathrooms, bedrooms or any occupied rooms normally kept closed. See chapter 3.2 and 3.5.

4.You must vent your heater. See chapter 3.6 Venting.

5.The appliance and its gas connection must be leak tested before placing the appliance in operation. The appliance must be isolated from the gas supply piping system by closing its individual manual gas shutoff valve (not supplied with heater) during any pressure testing at pressures in excess of ½ Psig (3.5 kPa).

6.Keep water heater area clear and free from combustibles and flammable liquids. Do not locate the heater over any material which might burn.

7.Correct gas pressure is critical for the optimum operation of this heater. Gas piping must be sized to provide the required pressure at the maximum output of the heater, while all the other gas appliances are in operation. Check with your local gas supplier, and see the section on connecting the gas supply.

8.Should overheating occur or the gas supply fails to shut off, turn off the gas supply at the manual gas shut off valve, on the gas line. Note: manual gas shutoff valve is not supplied with the heater.

9.Do not use this appliance if any part has been underwater. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been underwater.

10.Failure to install heater correctly may lead to unsafe operation and void the warranty.

11.The heater must not be installed in an unheated area where temperatures will reach 36°F or lower. If the heater is left in an area susceptible to such temperatures, drain the unit and disconnect from electrical supply. See Chapter 4.7 for additional freeze prevention information.

12.In areas where water supply has a high mineral content, a water softener is strongly recommended. A water softener is required if the water hardness exceeds 6 grains/gal (103 mg/l) calcium carbonate. Damage to the water heater resulting from hard water/scale deposits will not be covered under warranty.

6	6 720 607 909

GWH-345/450-ESR-L, GWH-345/450-ESR-N specifications

Bosch Appliances has long been recognized for its innovative and high-quality home appliances, and the GWH-345/450-ESR-N and GWH-345/450-ESR-L water heaters are no exception. These models offer exceptional efficiency and reliability, making them ideal choices for modern households seeking dependable water heating solutions.

One of the standout features of the GWH-345/450-ESR series is their impressive energy efficiency. Engineered with cutting-edge technology, these units operate with high thermal efficiency ratings. This not only translates to reduced energy bills for consumers but also supports environmentally friendly practices by minimizing energy consumption. The tankless design eliminates the need for a storage tank, providing hot water on demand while ensuring that no energy is wasted in heating and re-heating stored water.

Both models come equipped with advanced safety features. The integrated combustion management system ensures precise control of the combustion process, which not only enhances heating efficiency but also reduces the risk of overheating. Additionally, the built-in safety mechanisms, such as flame failure protection and overheat protection, provide consumers with peace of mind knowing their home is protected.

These Bosch water heaters also feature a user-friendly digital display that allows for easy temperature adjustment and monitoring. The intuitive interface enables users to set their desired water temperature with precision, ensuring comfort and convenience. Furthermore, these models are designed for quiet operation, making them suitable for installation in various locations within the home without causing disruptive noise.

The construction of the GWH-345/450-ESR-N and GWH-345/450-ESR-L models is robust, featuring high-quality materials that ensure durability and longevity. The compact and sleek design allows for flexible installation options, even in smaller spaces. With a variety of venting options available, including direct vent and power vent configurations, these heaters can fit seamlessly into different home layouts.

In summary, Bosch Appliances GWH-345/450-ESR-N and GWH-345/450-ESR-L models represent the pinnacle of modern water heating technology. With their energy-efficient performance, advanced safety features, user-friendly controls, and durable construction, these water heaters are designed to meet the demands of today’s homes while delivering reliable hot water whenever needed. These innovative appliances reinforce Bosch's reputation as a leader in home heating solutions, ensuring that customers can enjoy hot water with confidence and peace of mind.