Sharp MD X5 operation manual Error messages Meaning Remedy, Blank MD

(Continued)

When an error message is displayed, proceed as follows:

Error messages	Meaning	Remedy
BLANK MD	• Nothing is recorded.	• Replace the disc with a recorded disc.
	(Neither music nor a disc name have been recorded on this MD.)
Can't COPY	• You tried to record from a disc which you are not allowed to copy.	• Replace it with another disc which you can copy from (regular CD).
Can't EDIT	• A track cannot be edited.	• Change the stop position of the track and then try editing it.

Can't REC	• Recording cannot be performed correctly due to vibration
	or shock in the unit.

• Rerecord or replace it.

DEFECT	• Since this disc has scratches on it, the recording operation	• Replace the disc with another recordable disc.
	was skipped.
Din UNLOCK	• Incorrect digital signals are input.	• Connect correct digital signals.
		• Use analog inputs.
DISC ERR*	• The disc is damaged or there is no TOC on the disc.	• Reload the disc or replace it.
DISC FULL	• The disc is out of recording space.	• Replace the disc with another recordable disc.
EDIT OVER	• There is no space left for recording CD.	• Replace it with another recordable disc.
FOCUS ERROR	• The proper focus cannot be obtained.	• Reload the disc.

MD ERROR	• The unit has determined that it is out of order
	by performing a self-diagnosis.

• Ask the store where you purchased this unit, about repairs.

MECHA ERR*	• There is a mechanical problem and the disc is not working
	properly.

• Turn off the power, and press the EJECT button.

NAME FULL	• The number of characters for the disc name or track name
	exceeds 100.

• Shorten the disc or track name.

NO DISC	• A disc has not been loaded.	• Load a disc.
	• The disc data cannot be read.	• Reload the disc.
NOT AUDIO	• The data recorded on this disc is not audio data.	• Select another track.
		• Replace the disc.
PLAYBACK MD	• You tried to record on a playback-only disc.	• Replace it with a recordable disc.
PROTECT	• The unit has determined that it is out of order by performing a	• Turn the power off and back on. If the problem is not resolved,
	self-diagnosis.	ask the store where you purchased this unit, about repairs.
PROTECTED	• The disc is write protected.	• Move the write protection tab back to its original position.
TEMP OVER	• The temperature is too high.	• Turn off the power, and wait for a while.

TOC ERR*	• The disc has a large amount of damage.
	• TOC information cannot be read.
	• The MD does not meet the specifications for MDs.

• Replace the disc with another disc.

TOC FULL*	• There is no space left for recording character information
	(track names, disc names, etc.).

• Replace it with another recordable disc.

TOC W ERROR • The unit has determined that it is abnormal by performing a self-diagnosis.

• Ask the store where you purchased this unit, about repairs.

U TOC ERR*	• The TOC information on this disc does not meet the MD	• Replace it with another disc.
	specifications or it cannot be read.	• Erase all the data, and try recording.
U TOC W ERROR	• The TOC information could not be created properly due to	• Turn off the power, and try to write the TOC again.
	a mechanical shock or to scratches on the disc.	(Remove any source of shock or vibration while writing.)
? DISC	• The data contains an error.	• Replace the disc with another disc.
0 00:00	• Music is not recorded.	• Replace the disc with a recorded disc.

*: Number or symbol

40

*35-40 40 98.6.23, 10:11 AM