Sharp MD X5 3,4,5 6

26 H To create a track name

1During playback, press the NAME/TOC EDIT button.

I“TRACK NAME” will appear.

2Within 10 seconds, press the ENTER button.

IThe unit will enter the character input mode.

IThe track you are listening to will be played repeatedly.

3Press the DISPLAY button to select the type of characters. (Page 25)

4Select the character you want using the 1/0/▲/▼ buttons.

IWhen the ▲ or ▼ button is pressed, the following 5 letters will appear.

IEach time the 1 or 0 button is pressed, the cursor will move to the next

letter.

5Press the ENTER button to enter the character.

IRepeat steps 3 to 5 above to enter characters in the name. When the

next character’s type is the same as the previous character, step 3 can

be skipped.

6After entering all of the characters in the name, press the NAME/TOC

EDIT button.

IThe track name will be recorded.

IThe unit will return to normal playback.

Notes:

IThe track name function can be used while in the stop mode (when

selecting a track), in the pause mode, or in the recording mode.(Select

“TRACK NAME” from the edit menu.)

IIf you create a track name while recording the track, make sure you

finish entering the name before you finish recording the track.

If the end of the recording is reached before you have entered the

complete name, only the characters entered before the recording

ended will be recorded.

HTo erase track names

After performing steps 1 to 2 mentioned above, do the following:

1Press the TIMER/DELETE button for at least 2 seconds.

IThe "NAME CLEAR?" display will appear.

2Press the ENTER button.

IThe track name will be erased.

Alphabetics

(capital letters) Alphabetics

(lower-case letters) Numbers or symbols

©©

HTo erase a character

1To correct a disc name, perform steps 1 - 3 on page 25.

To correct track names, perform steps 1 - 2 on page 26.

2Press the CURSOR << or >> button to make the character you wish

to erase begin flashing.

3Press the TIMER/DELETE button.

IThe specified character will be erased.

4Press the NAME/TOC EDIT button.

HTo add a character

1To correct a disc name, perform steps 1 - 3 on page 25.

To correct track names, perform steps 1 - 2 on page 26.

2Press the CURSOR << or >> button to make the character at the

position where you wish to add a character begin flashing.

3Select the character you want to add, using the 1/0/▲/▼ buttons.

4Press the ENTER button.

IA letter will be added, and the original letters will move to the right by

one.

5Press the NAME/TOC EDIT button.

(Continued)

1,6

3

2,5

3,4,56

*22-34 98.6.23, 10:10 AM26