35

HH
HH

HListening to sound from an external unit

To listen to sound from an external unit connected to the digital
input terminal:
1Press the AUX button.
AUX → AUX1 DIGITAL → AUX2 DIGITAL → PHONO
ITo select "AUX1 DIGITAL" or "AUX2 DIGITAL".
2Start playback on the external unit.
3Adjust the sound level using the VOLUME buttons of this unit.
To listen to sound from an external unit connected to the analog
input terminals:
1Press the AUX button.
AUX → AUX1 DIGITAL → AUX2 DIGITAL → PHONO
ITo select "AUX" or "PHONO".
2Start playback on the external unit, and adjust the input sound level
using the INPUT LEVEL control.
IWhen the INPUT LEVEL control is set to Min, no sound is obtained.
IThe maximum level should not exceed "0 dB".
3Adjust the volume using the VOLUME buttons on this unit.
HH
HH

HRecording sound from an external unit

To start recording the moment the external unit starts playback
(synchro recording):
MD recording will start automatically, as soon as playback starts on the
external unit. This applies to both digital inputs and analog inputs.
IThe space-cut function will work automatically during synchro record-
ing.
1Load a recordable MiniDisc.
2Press the AUX button.
ISelect the input that corresponds to the terminals where the external
unit you will record from is connected.
3Play the recording on the external unit, and adjust the recording level
using the INPUT LEVEL control. (This is only necessary when recording
from analog inputs.)
IIn the case of digital inputs, it is not necessary to adjust the recording
level.
IThe maximum level should not exceed "0 dB".
IAdjust the recording level, and then stop the external unit.
4Press the S. SYNC button.
5Start playing the music you want to record on the external unit.
IRecording will start automatically.
6When playback has finished on the external unit, this unit will automati-
cally enter the recording stand-by mode.
ICancel the mode by pressing the MD ■ button.
When the MD ■ button is pressed, the TOC will be recorded.
If you want to perform other operations at this point, wait until this display
disappears.
To stop recording:
Press the MD ■ button.
Note:
IOn some CD players, the track numbers cannot be recorded automati-
cally.
→
→
VOLUME
INPUT LEVEL
AUX
1
2
3
4
H
2
H
(Continued)
What is the space-cut function?
If there is silence in the playback signal that lasts 4 seconds during a
synchro recording, the recording will stop automatically and the unit will
enter the recording stand-by mode. Then, when sound from the
playback unit resumes, recording will automatically restart.
(A space of 4 seconds is placed between tracks.)
IIf there is noise between tracks of the sound source, the synchro
recording or the space-cut function may not work properly.
If this happens, make the recording manually.
IWhen you need to record tracks or audio that include very quiet
passages lasting 4 seconds or more, manual recording is recom-
mended.
*22-34 98.6.23, 10:11 AM35