Sharp MD X5 HOW to USE the BUILT-IN Timer, Timer playback, Programming for timer playback

HOW TO USE THE BUILT-IN TIMER

	ENTER
	TIMER/
	DELETE
1	6
2
3
4	7
	8
5	9

HTimer playback

Before timer playback, the following preparations are required.

IMake sure that the clock setting is correct. (Page 8)

ILoad a CD or a MD.

IPreset the radio station. (Page 12)

Programming for timer playback:

1 While in the stop mode, press the TIMER/DELETE button and then the

▲or ▼ button so that the TIMER SET display appears.

2 Within 10 seconds, press the ENTER button, and then select the timer mode using the ▲ or ▼ button.

3 Press the ENTER button.

IThe start time setting display will appear.

4 Enter the hour for the start time using the 1 or 0 button. Then, press the ENTER button.

5 Enter the minute using the 1 or 0 button. Then, press the ENTER button.

IThe stop time setting display will appear.

IThe display time will increase by one hour automatically.

6 Enter the hour for the stop time using the 1 or 0 button. Then, press the ENTER button.

7 Enter the minute using the 1 or 0 button. Then, press the ENTER button.

IThe start and stop times are now set.

8 Select the source program using the 1 or 0 button.

IThe source is selected in the following sequence:

MD → CD → TUNER → AUX → DIGITAL1 → DIGITAL2 → PHONO

→

IIf TUNER is selected, press the ENTER button, and then select the preset number using the 1 or 0 button.

9 Press the ENTER button.

10 Adjust the volume level using the 1 or 0 button.

11 Press the ENTER button.

ITimer playback setting is complete.

Note:

IIf you do not perform the next operation within 10 seconds, the operation will be canceled. If this happens, try the operation again from the beginning.

Setting timer playback:

1 Press the TIMER/DELETE button.

IPress the ▲ or ▼ button so that the T-STANDBY display appears.

2 Press the ENTER button.

IThe settings will appear in order, and the unit will enter the timer playback standby mode. (If the power is on, the unit will be turned off.)

1

2

3 When the timer playback start time is reached, the power will be turned on and the volume will gradually increase to the preset position.

When the timer playback stop time is reached, the power will be turned off automatically.

Notes:

IWhen the CD or MD is played to the end, playback will stop before the stop time.

If you wish to play to the stop time, set repeat play for the CD or MD.

IThe timer playback with this unit cannot be used to control equipment connected to this unit. You must use the timer of the other equipment, if it has one.

IThe timer playback and timer recording functions cannot be used at the same time.

29

*22-34 29 98.6.23, 10:11 AM