(Continued)

 

 

ENTER

 

TIMER/

 

DELETE

1

6

2

 

3

 

4

7

 

 

8

5

9

 

1

2

 

Notes:

 

IYou cannot make a timer recording using CDs.

IThe timer recording with this unit cannot be used to control equipment connected to this unit. You must use the timer of the other equipment, if it has one.

IThe timer playback and timer recording functions cannot be used at the same time.

In the following cases, the timer recording function will not work.

IWhen a MiniDisc has not been inserted.

IWhen a playback-only MiniDisc is inserted.

IWhen the MiniDisc you inserted is protected against accidental erasure.

IWhen there is no recording space left on the MiniDisc you have inserted .(when the "TOC FULL" or "DISC FULL" messages ap- pear)

HTimer recording

Before timer recording, the following preparations are required.

IMake sure that the clock setting is correct. (Page 8)

ILoad a recordable MD.

IPreset the radio station. (Page 12)

Programming for timer recording:

1 While in the stop mode, press the TIMER/DELETE button, and then the

or button so that the TIMER SET display appears.

2 Within 10 seconds, press the ENTER button, and then select the timer mode using the or button.

3 Press the ENTER button.

IThe start time setting display will appear.

4 Enter the hour for the start time using the 1 or 0 button. Then, press the ENTER button.

5 Enter the minute using the 1 or 0 button. Then, press the ENTER button.

IThe stop time setting display will appear.

IThe display time will increase by one hour automatically.

6 Enter the hour for the stop time using the 1 or 0 button. Then, press the ENTER button.

7 Enter the minute using the 1 or 0 button. Then, press the ENTER button.

IThe start and stop times are now set.

8 Select the source program using the 1 or 0 button.

IThe source is selected in the following sequence:

TUNER AUX DIGITAL1 DIGITAL2 PHONO

IIf TUNER is selected, press the ENTER button, and then select the preset number using the 1 or 0 button.

9 Press the ENTER button.

10 Adjust the volume level using the 1 or 0 button.

11 Press the ENTER button.

ITimer recording setting is complete.

Note:

IIf you do not perform the next operation within 10 seconds, the operation will be canceled. If this happens, try the operation agein from the beginning.

Setting timer recording:

1 Press the TIMER/DELETE button.

IPress the or button so that the T-STANDBY display appears.

2 Press the ENTER button.

IThe settings will appear in order, and the unit will enter the timer recording standby mode. (If the power is on, the unit will be turned off.)

3 When the timer recording start time is reached, the power will be turned on to start recording.

When the timer recording stop time is reached, the power will be turned off automatically.

30

*22-34

30

98.6.23, 10:11 AM

Page 31
Image 31
Sharp MD X5 operation manual Timer recording, Programming for timer recording, Setting timer recording