(Continued)

 

 

 

H Connecting the AC power cord

 

 

I After connecting the speakers, plug the AC power cord into a conven-

 

 

ient AC outlet.

 

To an AC outlet

I Plug the AC power cord into a convenient AC outlet. The letters "ENJOY

 

MUSIC!" will be scrolled across the display.

 

AC 120 V, 60 Hz

I Unplug the AC power cord from the AC outlet if the unit is not to be used

 

 

 

 

for a prolonged period of time.

 

 

H Loading the batteries for the remote control

1

 

I When inserting or removing the batteries, push them towardr the Ï

 

 

battery terminals.

 

 

I Installing the batteries incorrectly may cause the unit to malfunction.

 

 

Precautions for battery use:

 

I 2 "AA" size

I Insert the batteries according to the direction indicated in the battery

 

batteries

2

(UM/SUM-3, R6,

compartment.

HP-7 or similar)

I Replace all old batteries with new ones at the same time.

 

 

I Do not mix old and new batteries.

 

 

I Remove the batteries if they are weak or if the unit is not in use for long

 

 

periods to prevent potential damage due to battery leakage.

3

 

Caution:

 

Do not use rechargeable batteries (nickel-cadmium battery, etc.)

 

 

 

 

Notes concerning use:

 

 

I Replace the batteries if the control distance decreases or operation

 

 

becomes erratic.

 

 

I Periodically clean the transmitter LED on the remote control and the

 

 

sensor on the main unit with a soft cloth.

 

8" - 20'

I Exposing the sensor on the main unit to strong light may interfere with

 

(0.2m - 6m)

operation. Change the lighting or the direction of the unit.

 

I Keep the remote control away from moisture, excessive heat, shock,

 

 

 

 

and vibrations.

 

15

 

 

Remote sensor

 

 

15

 

 

 

H To change the brightness of the display

 

 

Turn the power on, and keep pressing the DISPLAY button for more than

 

 

two seconds.

 

 

The “DIMMER ON” display will appear, and the display will be dimmer.

 

 

To return to the original brightness, keep pressing the DISPLAY

 

 

button for more than two seconds.

 

DISPLAY

The “DIMMER OFF” display will appear, and the original brightness is

 

retrieved.

 

 

6

*01-21

6

98.6.23, 10:09 AM

Page 7
Image 7
Sharp MD X5 Connecting the AC power cord, Loading the batteries for the remote control, Precautions for battery use