(Continued)

 

2

 

4,5

6

 

1

3

 

 

1

3

 

Start track number

4

 

5

 

Selected tracks

End track number

HRecording desired tracks from a CD onto a MiniDisc (Track Editing)

You can record one track or a series of several tracks from a CD onto an MD.

You can select one track and record it. (If the track numbers are not in succession, you cannot select a series of tracks.)

1 Press the CD H button, and load a compact disc.

2 Load a recordable MiniDisc.

3 Select the track to start recording by the 5 or 4 button.

IThe selected track number appears.

4 Press the TRACK button.

ITo record a single track, skip to step 6.

5 Select the track to end recording by pressing the TRACK button.

6 Press the CD 0 MD button.

IWhen all tracks are recorded, recording automatically stops.

If recording does not begin:

When not all of the tracks on a CD can be recorded, the unit will enter the recording stand-by mode. To record on only those tracks which can be recorded, press the CD 0 MD button.

To cancel operation:

Before pressing the CD 0 MD button, press the CD H or MD H button.

To stop recording:

Press the CD H button.

After recording the track number, playback and recording will stop. It is not possible to pause recording.

To rerecord:

If you wish to rerecord, you can erase a track that is already recorded, starting from any point in the old track, to begin a new recording.

Be aware that when you do this, all of the tracks and track names that follow the newly recorded track will be erased.

1 During playback, press the MD 06 button at the point where you wish to begin rerecording.

IThe unit will pause.

2 Press the I REC button.

IThe "R.ERASE OK?" display will appear.

3 Press the ENTER button.

IThe unit will enter the recording stand-by mode.

4 Select the recording source and start recording.

18

*01-21

18

98.6.23, 10:09 AM

Page 19
Image 19
Sharp MD X5 operation manual To rerecord