(Continued)

1,4

2

3,52

1

2

3

5

1

2

3,4

2

3

4

HMove

1 While in the stop mode, select the track you wish to move using the 5 or 4 button.

IStart playing the track to be moved, and then press the MD 06button.

2 Press the NAME/TOC EDIT button, and then select “MOVE” using the

or button.

3 Within 10 seconds, press the ENTER button.

4 Select the direction to move the track using the 5 or 4 button.

ITo increase the track number ... 4

ITo decrease the track number ... 5

ITo cancel the operation, press the MD H button.

5 Press the ENTER button again.

IThe track is moved, and the unit is stopped at the beginning of the track.

Note:

IWhen a track has been moved, the other tracks which are affected will be assigned new track numbers automatically.

Programmed move:

1 Select the tracks you want to move and enter them into a program. (Page 14)

2 Make sure that the “PRGM” indicator is lit, and then press the NAME/ TOC EDIT button.

3 Within 10 seconds, press the ENTER button.

ITo cancel the operation, press the MD H button.

4 Press the ENTER button again.

IThe tracks will be moved, and the programmed move mode will end.

Notes:

IThe track numbers that are not included in the programmed selections will be put at the end of the new sequence.

IWhen the same track has been entered into the program twice or more, the last programmed position will have priority.

23

*22-34

23

98.6.23, 10:10 AM

Page 24
Image 24
Sharp MD X5 operation manual Move, Programmed move