RADIO OPERATION

3

1,2

4,5

31,2

Frequency

Stereo mode indicator

FM stereo reception indicator

HTuning

1 Press the TUNER (BAND) button.

IThe power is turned on, and the tuner is selected.

2 Press the TUNER (BAND) button to select the desired frequency band (FM or AM).

3 Tune in to the desired station using the TUNING X or W button.

Auto tuning:

When the TUNING X or W button is pressed for more than 0.5 seconds and then released, the tuning stops at the first receivable broadcast station.

Notes:

IWhen radio interference occurs during auto tuning, auto tuning may stop automatically at that point.

IIf a weak station signal is found during auto tuning, the station will be skipped.

ITo stop auto tuning, press the TUNING X or W button again.

Manual tuning:

Press the TUNING X or W button as many times as necessary to adjust the frequency display to the frequency of the desired station.

4 To receive FM stereo, press the ST-MODE button on the remote control so that the "STEREO" indicator appears.

I“ST” will appear when an FM broadcast is in stereo.

5 If the FM stereo reception is weak, press the ST-MODE button so that the “STEREO” indicator goes out.

IAlthough the reception changes to monaural, the sound becomes clearer.

After use:

Press the POWER button to turn the power off.

Direct playback:

Just pressing the TUNER (BAND) button will turn on the power automati- cally. The radio station you were listening to last will be tuned in.

Notes:

IThe memory recalls the last station received even after changing the TUNER (BAND) button or function selector buttons, or pressing the POWER button to turn the power off.

IIf you are listening to the radio near personal computers, radios, or TV sets, various noise or interference may be heard. Keep this unit as far away as possible from these products.

11

*01-21

11

98.6.23, 10:09 AM

Page 12
Image 12
Sharp MD X5 operation manual Radio Operation, Tuning, Auto tuning, Manual tuning