COMPACT DISC OPERATION
1
5
2, 4
3
1
5
Total number of tracks | Total playing time | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Music schedule | (More tracks indicator) |
HLoading and playing CDs
1 Press the CD H button.
IThe power will be turned on automatically, and the unit will enter the CD playback mode.
2 Press the 7 button to open the disc tray.
3 Place the CD on the disc tray, label side up.
IA CD can be placed on any open position on the disc tray.
IBe sure to place 3" (8 cm) CDs in the middle of the disc holder.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
4 Press the 7 button to close the disc tray.
IThe total number of tracks and the total disc playing time will be displayed.
IThe music schedule will be displayed only for the number of tracks on the disc.
IIf the CD contains more than 21 tracks, “Y” will appear.
5 Press the CD 06 button.
IPlayback will begin from track 1 on the disc you have specified.
IWhen all the tracks on the CD have finished playing, the unit will stop automatically.
To interrupt playback:
Press the CD 06 button.
Press the CD 06 button to resume playback from the same point.
To stop playback:
Press the CD H button.
To remove the CDs:
While in the stop mode, press the 7 button.
After use:
Press the POWER button to turn the power off.
Direct playback:
If a CD is loaded in the unit, pressing the CD 06 button turns the power on and begins playback.
Cautions:
IDo not carry the unit with a disc left in the disc tray. The disc may come loose inside the unit and be damaged or cause damage to the unit. This may also cause malfunctions.
IDo not place two CDs in the disc tray.
IDo not push the disc tray while it is moving.
IIf the power fails while the drawer is open, wait until the power is restored before trying to close it.
IIf the disc drawer is stopped forcibly, “ERROR” will appear on the display and the unit will not function.
If this occurs, turn the power off, and turn it on again.
IIf TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
IIf the main unit is subjected to a sharp jolt or it is used where vibrations are present, sound dropouts may occur. Use the unit in a stable environment.
If the volume is set to too high, a dropout may occur due to vibrations from the speakers. If this happens, move the main unit away from the speakers or turn down the volume.
IDo not use CDs with loose cellophane tape or stickers or CDs which have glue left on the surface from tape or stickers. If such a CD is inserted, you may not be able to remove the CD or the unit may malfunction.
9
9 | 98.6.23, 10:09 AM |
