Sharp MD X5 Entering Characters, To change the message displayed when Power is turned off

Press the NAME/TOC EDIT button.

Select the location number you want to name.

Press the TUNER (BAND) button.

1

2

3

4 Press the DISPLAY button to select the type of characters you want to use. (Page 25)

H To create names for radio stations that have been stored in memory

ENTERING CHARACTERS

2	1
3,7	5
5	4
6	5

3

7

Note:

IYou can enter up to 12 characters.

You cannot save a name with more than 12 characters.

3

3 2

1,5

Alphabetics	©	Alphabetics	© Numbers or symbols
(capital letters)		(lower-case letters)
©

5 Select the character you wish using the 1/0/▲/▼ buttons. 6 Press the ENTER button to enter the character.

IRepeat steps 4 to 6 above to enter the characters of the name. When the next character’s type is the same as the previous character, step 4 can be skipped.

7 After entering all of the characters in the name, press the NAME/TOC EDIT button.

IThe name will be recorded.

To erase a name:

After performing steps 1 to 3 mentioned above, do the following:

1 Press the TIMER/DELETE button for at least 2 seconds.

IThe "NAME CLEAR?" display will appear.

2 Press the ENTER button.

IThe name will be erased.

HTo change the message displayed when the

power is turned off

It is possible to change the message displayed on the LCD when the power is off, to suit your preference.

The default message is "ENJOY MUSIC!".

This can be changed to any other message you choose, up to 20 characters in length.

1 Press the MESSAGE button.

IThe unit will enter the character input mode.

2 Press the DISPLAY button to select the type of characters you want to use.(Page 25)

4

Note:

3

Alphabetics	©	Alphabetics	© Numbers or symbols
(capital letters)		(lower-case letters)
©

3 Select the character you wish using the 1/0/▲/▼ buttons.

4 Press the ENTER button to enter the character.

IRepeat steps 2 to 4 above to enter the characters of the name. When the next character’s type is the same as the previous character, step 2 can be skipped.

5 After entering all of the characters in the name, press the MESSAGE button.

IThe message will be recorded.

6 Turn the power off, and check the contents of the programmed mes- sage.

To erase a programmed message:

1 Press the MESSAGE button.

2 Press the TIMER/DELETE button for at least 2 seconds.

IThe "NAME CLEAR?" display will appear.

3 Press the ENTER button.

IWhen the power is on and you do not make any changes or press any buttons for at least 5 minutes (while in the CD or MD playback mode), the message will be displayed.

IThe programmed message will be erased, and the display will return to"ENJOY MUSIC!".

27

*22-34 27 98.6.23, 10:10 AM