Connecting a general audio source
By connecting an audio device that provides the analog line output to the analog input jack of the
Audio.device
Analog line.output.
<Memo>:When both the analog input jack and USB connector (type A) are plugged in, the signal from the analog input jack takes priority over the iPod/iPhone signal (the iPod/iPhone signal is not output from the
Connecting a recorder or audio amplifier
In addition to the headphone output, the
By connecting a recorder or audio amplifier to ei- ther of these jacks, you can copy iPod/iPhone au- dio sources or monitor them from a speaker system with fine audio quality.
Using the [S/PDIF] output jack
The [S/PDIF] output jack outputs the S/PDIF digital signal that is
Audio.recorder/amplifier
Digital.
input.jack
Using the [LINE OUT] jack
The [LINE OUT] jack outputs an analog audio sig- nal that is converted from an iPod/iPhone digital audio signal or that is fed to the analog input jack. By connecting a recorder or audio amplifier to this jack, you can make audio dubbing of your iPod/ iPhone audio sources or monitor iPod/iPhone from your speaker system.
<Memo>:You cannot control the output level of the [LINE OUT] jack using the power switch/ volume control dial.
Audio.device
Analog input