Fostex HP-P1 manual Specifications, Setting the filter

Page 9

Setting the filter

You can select the digital filter type using the [FIL- TER] switch depending on your preference.

There are two switch positions; “1” and “2”.

1:Conventional digital filter called “sharp roll-off filter”.

2:AKM’s newly developed digital filter called “mini- mum delay filter”. It accurately reproduces the original recorded sound without pre-echo.

<Memo>:The [FILTER] switch only affects the headphone output. It does not affect the [LINE OUT] jack.

Specifications

Headphone output jack (stereo mini jack) Maximum output power: 80 mW + 80 mW Applicable load impedance: 16 ohms or more Frequency response: 20 Hz to 20 kHz +/- 0.3 dB (at 32 ohm load, 80 mW output power)

[LINE OUT] jack (stereo mini jack)

Nominal output level: -10 dBV

Analog input jack (stereo mini jack) Maximum input: Approx. 3.0 Vrms

[S/PDIF] output jack (optical) S/PDIF format (IEC 60958-3)

USB connector (type A) for Dock Connector to USB cable

For iPod/iPhone connection USB Type A

[DC-IN] port

USB Type mini B

• Power supply

Internal lithium-ion battery

• External dimensions

75 (width) x 25 (height, excluding rubber feet) x

130 (depth, including protrusions) mm

• Weight: Approx. 260 g

*“Made for iPod” and “Made for iPhone,” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the de- veloper to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regula- tory standards. Please note that the use of this accessory with iPod, iPhone, may affect wireless performance.

*iPhone, iPod, iPod classic, iPod nano, iPod shuf- fle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

*Specifications and appearance are subject to change without notice for product improvement.

E-9

Image 9
Contents 8289676000 525714 Safety Instructions Table of contents Power supply Supplied accessoriesCharging the battery IntroductionFront panel Names and functionsTop panel Rear panelConnecting a sound source Connecting an iPod/iPhoneConnecting an old iPod/iPhone Connecting a general audio source Connecting a recorder or audio amplifierUsing the S/PDIF output jack Using the Line OUT jackVarious settings Turning on or off the powerSetting the filter SpecificationsDeclaration of EC Directive

HP-P1 specifications

The Fostex HP-P1 is a portable headphone amplifier and digital-to-analog converter (DAC) that caters to audiophiles and music enthusiasts alike. This device cleverly combines high-performance audio technology with portability, making it an invaluable tool for those who wish to enjoy premium sound quality on the go.

One of the standout features of the HP-P1 is its high-resolution audio capabilities. It supports a wide range of formats, including 24-bit/96 kHz playback, ensuring that users can enjoy their music at its finest quality. The HP-P1 utilizes a proprietary DAC, which provides a significant upgrade over standard headphone outputs found in most portable devices. This DAC is responsible for converting digital audio signals into high-fidelity analog signals, creating a rich and immersive listening experience.

In terms of design, the HP-P1 is compact and lightweight, making it easy to carry around. It features a sleek aluminum casing that not only offers durability but also aids in shielding against electromagnetic interference, maintaining the integrity of the audio signal. The device is simple to operate, featuring an intuitive interface with clearly labeled buttons for volume control and source selection.

The headphone amplifier section is another highlight, delivering sufficient power to drive a wide range of headphones, from low-impedance models to higher-end audiophile gear. This versatility allows users to achieve optimal sound quality regardless of their headphone choice.

Connectivity options on the Fostex HP-P1 are robust. It includes a USB input for direct connection to computers and mobile devices, as well as a digital coaxial input for use with external digital sources. Additionally, it features a 3.5 mm headphone output and a line-out for those looking to connect to additional audio systems.

Battery performance is also noteworthy; the HP-P1 is equipped with a rechargeable lithium-ion battery that provides extended playtime, allowing users to enjoy their music without the need for constant recharging. This combination of high-quality audio processing, powerful amplification, and portability makes the Fostex HP-P1 a top contender for any serious audio enthusiast looking for a powerful yet convenient listening solution.