![](/images/new-backgrounds/1031390/3139015x1.webp)
Turning on or off the power
Turning on the power
To turn on the power, follow the procedure below.
1.Make sure that all the connections between the
2.Make sure that the internal battery is charged or the
3.Turn the power switch/volume control dial clock- wise until it clicks.
The power is turned on. The power indicator lights in red briefly and then turns to green.
If an iPod/iPhone is connected to the unit, the iPod/ iPhone is automatically turned on.
<Memo>:When the battery is exhausted, the power indicator lights in red.
Various settings
When you enjoy music via headphones, make the following settings appropriately depending on the circumstance or your preference.
Adjusting the volume
You can adjust the headphone volume using the power switch/volume control.
<Memo>:The power switch/volume control only affects the headphone output level. It does not affect the output level of the [LINE OUT] jack.
Turning off the power
To turn off the power, turn the power switch/volume control dial counterclockwise until it clicks.
Selecting the gain
You can select the gain of the headphone amplifier using the [GAIN] switch.
There are three switch positions available. The rightmost position provides the highest gain, while the leftmost position provides the lowest gain. Select the appropriate position depending on the sensitivity of your headphones.
<Memo>:The [GAIN] switch only affects the headphone output. It does not affect the [LINE OUT] jack.