American Water Heater 50-60K BTU, 40-42K BTU installation instructions

Page 1

Flammable Vapor Ignition Resistant Compliant

Power Direct Vent

Gas Water Heater

Installation

Instructions and

Use & Care Guide

WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

To obtain technical, warranty, or service assistance during or after the installation of this water heater, visit our website at:

http://www.americanwaterheater.com

or call toll free

1-800-456-9805

When calling for assistance, please have the following information ready:

1.Model number

2.7 digit product number

3.Serial number

4.Date of installation

5.Place of purchase

Table of Contents

2

INSTALLER:

•AFFIX THESE INSTRUCTIONS TO OR ADJACENT

TO THE WATER HEATER.

OWNER:

•RETAIN THESE INSTRUCTIONS AND WARRANTY FOR FUTURE REFERENCE. RETAIN THE ORIGINAL RECEIPT AS PROOF OF PURCHASE.

6510418 September 2007

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Flammable Vapor Ignition Resistant Compliant Installation Instructions Use & Care GuideTable Of Contents Water Heater SafetyConsumer Information Installing Your GAS Water HeaterConsumer Responsibilities Unpacking the Water HeaterSite Location Location RequirementsFire or Explosion Hazard State of California Clearances and AccessibilityGas Supply Gas Pressure TestingGas Requirements Gas PressureVenting Vent Pipe SystemVent Pipe Material Vent Pipe Connection to BlowerVent Pipe Length Vent Pipe InstallationVent Termination Locations US InstallationsStandard Horizontal Termination INLET/OUTLET Vent TerminationsVertical Termination Concentric Vent TerminationsWater System Piping Piping InstallationClosed System/Thermal Expansion Temperature and Pressure Relief ValveValve and Pipe Insulation Some Models Electrical Connections Wiring DiagramInstallation Checklist Lighting Instructions Operating Your Water HeaterReplace viewport if glass is Missing or damagedTemperature limiting valves are available Water Temperature RegulationG. Bottled Propane Models Water Heater OperationOperational Conditions Safety Shut-offCondensation Water Heater SoundsRoutine Preventive Maintenance Maintenance of Your Water HeaterTemperature and Pressure Relief Valve Draining and FlushingRemoving the Burner from the Manifold Assembly Replacement PartsRemoving and Replacing the Gas Control Valve/Thermostat Replacing the Manifold AssemblyLED Status Problem Solution TroubleshootingSee Anode ROD/WATER Above 170FODOR, Section Repair Parts List Repair Parts IllustrationListed Parts Kits and Illustrations

40-42K BTU, 50-60K BTU specifications

When it comes to reliable water heating solutions, American Water Heater Company stands at the forefront of the industry, offering a range of models, including those with 50-60K BTU and 40-42K BTU capacity. These water heaters are engineered to deliver consistent and efficient hot water supply for residential and commercial applications.

One of the standout features of American water heaters is their advanced insulation technology. These units come with high-density foam insulation that minimizes heat loss, ensuring that the water remains hot for extended periods. This feature not only improves energy efficiency but also reduces operating costs for users.

For the 50-60K BTU models, American Water Heater employs a powerful gas burner system that offers quick recovery rates, making it an ideal choice for larger households or businesses that require a high volume of hot water. This capability ensures that there is always an adequate supply of hot water for multiple simultaneous tasks, such as showering, washing dishes, and laundry.

On the other hand, the 40-42K BTU models provide an excellent balance between performance and energy conservation, making them suitable for medium-sized homes. These units are equipped with electronic ignition systems that enhance reliability and safety while providing a user-friendly experience. The electronic igniter eliminates the need for a pilot light, reducing gas consumption and increasing energy efficiency.

Durability is another hallmark of American Water Heater products. Constructed with robust materials, these units are designed to withstand the rigors of daily use while also resisting corrosion. This ensures a longer lifespan and reduces maintenance costs over time.

Safety features are also a priority for American Water Heater. Many models incorporate advanced safety systems, including temperature and pressure relief valves, ensuring user safety and compliance with building codes.

In terms of technology, American Water Heaters often include features that promote user convenience, such as programmable thermostats and easy-to-read digital displays. These allow homeowners to customize their hot water settings to fit their lifestyle, optimizing both comfort and energy efficiency.

Overall, American Water Heater’s 50-60K BTU and 40-42K BTU models epitomize quality, efficiency, and innovation in water heating technology, making them a preferred choice for consumers seeking effective and dependable hot water solutions.
Top Page Image Contents