A.O. Smith BT- 80 warranty Water Heater Makes Sounds

Page 17

if excessive, can drip into the floor shield. Also, during normal operation there may be occasions when large quantities of water are drawn, chilling the tank bottom. This too can result in condensation.

Condensation, appearing in the vent pipe (water dripping from draft diverter) during heater operation is evidence of poor vent action. Possible causes are too long a vent pipe or improper chimney operation.

3.If the leakage is from the temperature and pressure relief valve or its discharge pipe, it may represent a normal condition. However, see RELIEF VALVE section on page 14. DO NOT PLUG THE TEMPERATURE AND PRESSURE RELIEF VALVE. Also, the leakage could be due to unusually high water pressures or temperatures in the system, or to a faulty relief valve. Your dealer or a qualified service technician should be called to determine the cause of the problem and to correct it.

4.If you cannot identify or correct the source of water leakage:

Close the main shutoff valve in the gas supply pipe at the heater. See fig. 4, page 7.

Close the valve which feeds water to the cold water inlet at the top of the heater.

Contact your dealer.

WATER HEATER MAKES SOUNDS

1.Occasional excessive condensation, as explained under WATER LEAKAGE IS SUSPECTED, can cause a sizzling sound as the moisture is vaporized by the gas flame. This is a normal sound and may be disregarded.

2.Sediment and water scale accumulations may cause rumbling noises. See PREVENTIVE MAINTENANCE or contact your dealer for details of flushing the heater.

3.If you cannot identify or remedy the condition, contact your dealer.

17

Image 17
Contents Commercial GAS Water Heater Installation Operation Service Maintenance Limited WarrantyRecovery Ratings DimensionsTable of Contents Installation Instructions Clearances High Altitude InstallationsHard Water AIR RequirementsVenting Water Potable Heating and SpaceConfined Space System ConnectionsVent Connection Relief ValveGAS Piping GAS Piping and Dirt LEG Installation GAS Meter SizePurging GAS Pressure RegulatorTo Operate the Water Heater Page What to do if YOU Smell GAS For Your Safety Read Before LightingCheck Venting Temperature RegulationHigh Temperature Limit Switch Service InformationPilot and Main Burner Checking GAS InputVent System Replacement PartsHOT Water Odor Anode ROD InspectionDeliming Solvents Preventive MaintenanceTank Cleanout Procedure Checklist Water Heater Makes Sounds Model BT Limited Warranty Page Smith Water Products Company

BT- 80 specifications

A.O. Smith BT-80 is a notable model in the realm of water heater technology, representing a confluence of efficiency, durability, and advanced engineering. As an industry leader, A.O. Smith has designed this model with the end-user in mind, focusing on delivering a reliable and long-lasting water heating solution suitable for residential and light commercial applications.

One of the standout features of the BT-80 is its impressive 80-gallon capacity, which makes it ideal for households with high hot water demands. Whether it's for daily showers, laundry, or dishwashing, this water heater can accommodate the needs of larger families or homes that require a consistent supply of hot water throughout the day.

The BT-80 utilizes a high-efficiency burner that maximizes energy use, ensuring that less fuel is consumed while providing consistent heating performance. This feature not only reduces utility costs for the homeowner but also reinforces A.O. Smith's commitment to environmentally friendly solutions. Additionally, the water heater is equipped with an insulated tank that minimizes heat loss, further improving its efficiency.

Safety and reliability are key characteristics of the BT-80. It comes with advanced safety features, including a pressure relief valve that prevents excess pressure build-up, ensuring safe operation at all times. The product is also designed for easy maintenance, with accessibility features that allow users or technicians to perform routine checks and repairs conveniently.

This model incorporates cutting-edge technology such as the company's Blue Diamond® glass coating, which provides superior corrosion resistance. This protective feature extends the lifespan of the tank, making it an excellent investment for homeowners.

Moreover, the BT-80 is built to meet stringent industry standards, ensuring it not only performs well but also complies with local codes. Its robust construction means it can withstand various water conditions while maintaining efficiency.

In summary, the A.O. Smith BT-80 is an exemplary water heating solution characterized by its large capacity, energy-efficient operation, advanced safety features, and durable design. It is an ideal choice for customers seeking a reliable and efficient way to meet their hot water needs. With A.O. Smith's reputable engineering and commitment to quality, the BT-80 is a worthy consideration for anyone in the market for a new water heater.