Maintenance & Troubleshooting | Genie 3024 specification

6MAINTENANCE & TROUBLESHOOTING

FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM

If you have any questions, please do not hesitate to contact customer service at: 1.800.354.3643

IMPORTANT SAFETY INSTRUCTIONS

WARNING:Toreducetheriskofsevereinjuryordeath:

1.READ AND FOLLOW ALL INSTRUCTIONS.

2.Never let children operate or play with the door controls. Keep the remote away from children.

3.Always keep the moving door in sight and away from people and objects until the door is completely closed. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR.

4.NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR.

5.Test opener monthly. The door MUST reverse on contact with a 1-1/2" high object (or a 2" x 4" board laid flat) at the center of the doorway on the floor. After adjusting either the force or the limit of travel, retest the door opener. Failure to adjust the opener properly may cause severe injury or death.

6.When possible, use the emergency release only when the door is closed. Use caution when using this release with the door open. Weak or broken springs are capable of increasing the rate of door closure and increasing the risk of severe injury or death.

7.KEEP DOORS PROPERLY BALANCED. See your garage door Owner’s Manual. An improperly balanced door increases the risk of severe injury or death. Have a trained door system technician make repairs to cables, spring assemblies, and other hardware.

8.SAVE THESE INSTRUCTIONS.

WARNING

• Garage door hardware (springs, cables, brackets,

pulleys, etc.) are under extreme pressure and

tension.

• DO NOT attempt to repair or adjust door

springs or any hardware, and DO NOT OPERATE

garage door automatically or manually if door

is improperly balanced or springs are broken.

WARNING

Use wall console supplied with opener. Any other wall console can cause the opener to operate unexpectedly.

Safe-T-Beam® (STB) SYSTEM CHECK

• STB Red and Green LEDs ON steady, system OK

– CONTACT A TRAINED DOOR SYSTEM

TECHNICIAN.

ROUTINE MONTHLY MAINTENANCE

Basic monthly maintenance tasks.

•Door balance

•Safe-T-Beam® System Check

•Contact reverse

•STB Red LED flashes

–Check for obstruction

–Check alignment

–Verify wire routing from STBs to STB connection in power head

–Check for signal interference from another Safe-T-Beam® unit

FROM STBs

STB

FROM WALL

CONSOLE

NOT NOT

USED USED

BWC IWC

Instructions for these tasks and others are found on the following pages.

•No STB Red or Green LED displayed

–Check wiring and wire connections

DOOR BALANCE (SPRING TENSION)

•With the door closed, pull release handle DOWN and let go to release door carriage assembly from drive system.

•Raise door manually approximately 3’- 4’ and release.

–Door should remain stationary or move very slightly.

–If door moves quickly, CONTACT A TRAINED DOOR SYSTEM TECHNICIAN.

•Close the door.

•Pull emergency release handle DOWN and let go to engage carriage assembly to drive system.

–Operate door using remote or wall console.

–Door will re-attach itself to carriage assembly.

3’ - 4’

Sectional Door

FIG. 6-1 Door balance

01/27/2010

3’ - 4’

One-Piece Door

3024 specifications

The Genie 3024 and 3024H are part of Genie’s renowned line of compact scissor lifts, designed primarily for vertical access to elevated workspaces in various environments. With a remarkable blend of performance and ease of use, these models cater to the needs of contractors, maintenance crews, and facility managers alike.

One of the standout features of the Genie 3024 and 3024H is their impressive working height, which reaches up to 30 feet. This elevates the platform’s capabilities, allowing operators to complete tasks efficiently in tight spaces. The platform itself is spacious, providing ample room for tools and materials, which enhances productivity on the job site.

Both models are equipped with Genie’s patented Fast Mast technology, enabling users to elevate the platform quickly to the desired height while keeping the base on the ground. This feature significantly reduces downtime, making it easier for operators to complete tasks efficiently without unnecessary delays. This characteristic is especially beneficial in industries where time is of the essence.

The Genie 3024 and 3024H also come with a robust electric drive and hydraulic system, ensuring smooth and reliable operation both indoors and outdoors. Their compact size and tight turning radius allow them to navigate through narrow aisles and doorways with ease, making them ideal for use in warehouses, retail spaces, and smaller construction sites.

The models are designed with safety and stability in mind. They include features such as non-slip surfaces on the platform, automatic cut-off systems, and guardrails to ensure secure usage during operation. Additionally, the units are equipped with integrated wheel brakes that enhance safety when the lifts are stationed in elevated positions.

The Genie 3024H variant offers added flexibility with its high-capacity battery system, providing extended work cycles without the interruption of recharging. This makes the 3024H particularly suitable for extended job sites and projects where access to power might be limited.

In summary, the Genie 3024 and 3024H scissor lifts deliver an array of features that enhance both performance and safety, making them invaluable tools for anyone needing reliable vertical lift solutions. With a focus on compact design, quick operational capabilities, and enhanced safety measures, these models exemplify Genie’s commitment to meeting the evolving needs of the construction and maintenance industries.