Contact Reverse Test, Adjustment

CONTACT REVERSE TEST

The Force and Limit settings MUST be COMPLETED before testing.

1.Testing.

•Open garage door using wall console.

–Place a 2" x 4" board (laid flat) under center of garage door opening (Fig. 6-2).

•Close garage door using wall console.

•When door contacts board, the door must stop (within 2 seconds) and reverse direction returning to open position.

2.Adjustment.

•If the door does not reverse.

–Check to see if door has "down" limit properly set in the fully closed position. It should not have reached its "close" limit before hitting board. Reprogram close limit with door completely closed.

–If the door STOPS but does not reverse, reset your limits. Remove board. Return to pages

6-7 and repeat Limits settings to correct down limit.

•Test again. Repeat as necessary until door reverses upon contacting board.

FIG. 6-2 2 x 4 under center of door opening

MOTION DETECTOR - OVERVIEW

(Not available on all models)

Power heads equipped with a motion detector sensor provide additional security when

exiting or entering the garage area.

NOTE: Sensor positioning on the power head does not provide motion monitoring above the power head.

OPERATION

•Motion detector sensor is always ON. There are NO user controls or adjustments.

•Lights automatically turn ON when motion is detected and will turn OFF after 4 minutes of no motion.

•Motion detector sensor will not turn OFF lighting turned ON at the wall console.

•Lighting turned ON at the wall console will remain ON until wall console turns lighting OFF or opener is used.

Motion Detector Sensor

RESET - OPEN/CLOSE TRAVEL LIMIT

Performing all ten (10) Limits/Force setting steps (pages 6-7) erases previous Limits/Force settings.

NOTE: The opener will not close the door automatically unless the Safe-T-Beam® System is installed and Limits are programmed.

CARRIAGE ENGAGE/DISENGAGE

Use Release Handle to manually engage or disengage Carriage.

TO RELEASE CARRIAGE:

1. Pull DOWN on handle and let go.

2. Verify RED block is showing.

3. Raise or lower door manually.

Release Handle

FDOORBNOTICE	DOOR
COMESOBSTRUCTED
PULLDOWNONHANDLE

PULL

TO ENGAGE CARRIAGE:

1.Pull DOWN on handle and let go.

2.Verify RED block is NO LONGER showing.

3.Raise or lower door using remote or wall console.

FIG. 6-3 Disengage Carriage

WHEN RED BLOCK IS SHOWING

CARRIAGE IS UNLOCKED

LOCKED

UNLOCKED

FIG. 6-4 Carriage

(Standing below rail looking up at carriage)

PROGRAM

T—+

01/27/2010

3024 specifications

The Genie 3024 and 3024H are part of Genie’s renowned line of compact scissor lifts, designed primarily for vertical access to elevated workspaces in various environments. With a remarkable blend of performance and ease of use, these models cater to the needs of contractors, maintenance crews, and facility managers alike.

One of the standout features of the Genie 3024 and 3024H is their impressive working height, which reaches up to 30 feet. This elevates the platform’s capabilities, allowing operators to complete tasks efficiently in tight spaces. The platform itself is spacious, providing ample room for tools and materials, which enhances productivity on the job site.

Both models are equipped with Genie’s patented Fast Mast technology, enabling users to elevate the platform quickly to the desired height while keeping the base on the ground. This feature significantly reduces downtime, making it easier for operators to complete tasks efficiently without unnecessary delays. This characteristic is especially beneficial in industries where time is of the essence.

The Genie 3024 and 3024H also come with a robust electric drive and hydraulic system, ensuring smooth and reliable operation both indoors and outdoors. Their compact size and tight turning radius allow them to navigate through narrow aisles and doorways with ease, making them ideal for use in warehouses, retail spaces, and smaller construction sites.

The models are designed with safety and stability in mind. They include features such as non-slip surfaces on the platform, automatic cut-off systems, and guardrails to ensure secure usage during operation. Additionally, the units are equipped with integrated wheel brakes that enhance safety when the lifts are stationed in elevated positions.

The Genie 3024H variant offers added flexibility with its high-capacity battery system, providing extended work cycles without the interruption of recharging. This makes the 3024H particularly suitable for extended job sites and projects where access to power might be limited.

In summary, the Genie 3024 and 3024H scissor lifts deliver an array of features that enhance both performance and safety, making them invaluable tools for anyone needing reliable vertical lift solutions. With a focus on compact design, quick operational capabilities, and enhanced safety measures, these models exemplify Genie’s commitment to meeting the evolving needs of the construction and maintenance industries.