Remote Control
Example: To program the Macro 1 K button so that it turns on the HS 350 and your TV, follow these steps:
•Press the Macro 1 button K and Mute A buttons at the same time and then release them.
•Note that the Program Indicator will flash amber.
•Press the TV Selector 0.
•Press the Mute A button to store the HS’s power on command.
•Press the Screen Power On button button to store the TV Power On Command.
•Press the M N KL button 9 to complete the process and store the macro sequence.
After following these steps, each time you press the Macro 1 button K, the remote will send all Power On commands.
Erasing Macro Commands
To remove the commands that have been programmed into one of the Macro buttons, follow these steps:
1.Press the Mute button A and the Macro button K that contains the commands you wish to erase.
2. Note that the Program Indicator will flash amber, and the red LED under the Input Selector 0 last used will turn on.
3.Within ten seconds, press the Mute button A.
4.The red LED under the Selector will go out,
and the Program Indicator will turn
green and flash three times before it goes out.
5. When the Program Indicator | goes out, |
the Macro has been erased. |
|
30REMOTE CONTROL