Allstar Products Group 110927 Mounting the Quik-Code Wireless Keyless Entry

Page 2

Mounting the Quik-Code Wireless Keyless

 

 

 

 

 

Entry

 

 

 

 

 

 

Step 1: Choose a convenient location that does not

 

 

 

 

interfere with the normal opening and closing of the

 

 

 

 

door. Keep in mind that some doors swing outward 1

ABC

DEF

 

2

3

 

and will damage an improperly located keypad.

GHI

JKL

MNO

 

4

5

6

 

 

 

 

 

MOUNT THE KEYPAD A MINIMUM OF 5

PRS

TUV

WXY

 

7

8

9

 

*

 

 

 

FEET ABOVE THE GROUND TO KEEP IT

0

#

 

 

 

 

 

ON

 

 

OUT OF REACH OF CHILDREN.

 

 

RESET

 

 

 

 

 

 

 

Step 2: The screws provided are adequate for

 

 

 

 

mounting directly to wood or similar material. When

 

 

 

Mounting

mounting on

masonry or

similar

material

plastic

 

Battery

 

Holes Figure 1

anchors are

recommended.

Drill

a hole

for the

 

Hatch

 

 

 

 

 

bottom screw. Install the screw leaving the head of the screw approximately 1/8 inch out from the wall. Slide the keypad over the screw and mark the position of the top hole. Remove the keypad and drill the top hole. Slip the keypad back over the exposed screw and finish mounting by installing the top screw. Refer to Figure 1.

MOUNT THE KEYPAD IN A LOCATION THAT MINIMIZES THE POTENTIAL FOR THE USER TO COME IN CONTACT WITH A MOVING DOOR.

WARNING

Disconnect power to the operator before and during installation. Do not reconnect power until the mounting is complete. Ensure doorway is clear before testing the operation of the wireless keyless entry.

Programming the Quik-Code Wireless Keyless

Entry

When set to learn mode, the MVP receiver memorizes a PIN entered from the keypad. Once learned, this PIN activates the MVP operator.

Choose a four digit PIN that is easy to remember but not obvious. Avoid using house numbers, phone numbers or numbers that are easy to guess. The letters marked on the keypad may be used to help remember your PIN.

For example, 6-9-7-3or N-Y-P-D.

1

ABC

DEF

2

3

GHI

JKL

MNO

4

5

6

PRS

TUV

WXY

7

8

9

*

0

#

 

 

ON

RESET

WARNING

Unexpected door operations can cause personal injury or property damage.

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Features of the Quik-Code Wireless Keyless Entry ModelMounting the Quik-Code Wireless Keyless Entry Programming the Quik-Code Wireless Keyless EntryChanging the Quik-Code Wireless Keyless Entry PIN Programming Steps for Quik-Code Wireless Keyless EntryUsing the Quik-Code Wireless Keyless Entry Manufacturer’s Limited Warranty Operational Check

110927 specifications

Allstar Products Group 110927 is a remarkable offering in the realm of automotive accessories known for its innovative design and functional features. This product is tailored to enhance vehicle performance and driver convenience, making it a valuable addition for both everyday users and automotive enthusiasts alike.

One of the standout features of the Allstar Products Group 110927 is its robust construction. Designed to withstand the rigors of daily use, it incorporates high-quality materials that ensure durability and longevity. The product operates effectively under diverse environmental conditions, whether in extreme heat or cold, adding to its versatility and reliability.

The Allstar Products Group 110927 utilizes advanced technologies that set it apart from competitors. It showcases an ergonomic design that not only enhances user comfort but also improves overall efficiency. The product’s design elements are thoughtfully curated to facilitate ease of use, making it accessible for individuals of all skill levels. This user-centric approach ensures that consumers can enjoy the product without extensive training or prior experience.

Another key characteristic of the Allstar Products Group 110927 is its adaptability. It is designed to fit a wide range of vehicle types, ensuring that owners of various makes and models can benefit from its features. This universal compatibility is a significant advantage, reducing the hassle of searching for specific accessories that suit individual vehicles.

Additionally, the Allstar Products Group 110927 is equipped with safety features that enhance its functionality. These safety mechanisms contribute to a secure operation, minimizing the risk of accidents and ensuring that users can focus on the road ahead.

In terms of performance, the Allstar Products Group 110927 delivers exceptional results. Whether it is intended for use in seasonal conditions, maintenance tasks, or performance enhancements, it offers functionality that meets consumer demands.

Overall, the Allstar Products Group 110927 stands out as a dependable product blending durability, user-centric design, and advanced technology. Its features cater to a wide audience, making it a practical solution for improving automotive experience and performance. With its commitment to quality and performance, Allstar Products Group has cemented its reputation as a leader in the automotive accessories market.
Top Page Image Contents