NAT/Route mode installation | Configuring the FortiGate unit |
Connecting the FortiGate unit to the network(s)
50A
100
1
2
3
When you have completed the initial configuration, you can connect the FortiGate unit between your internal network and the Internet.
The following network connections are available on the FortiGate unit:
•Internal for connecting to your internal network
•External or WAN1 for connecting to the Internet
Modem is the interface for connecting an external modem to the
DMZ for connecting to a DMZ network. You can also connect both the external and DMZ interfaces to different Internet connections to provide a redundant connection to the Internet.
To connect the FortiGate unit
Connect the Internal interface to the hub or switch connected to your internal network.
Connect the External or WAN1 interface to the Internet.
Connect to the public switch or router provided by your ISP. If you are a DSL or cable subscriber, connect the External interface to the internal or LAN connection of your DSL or cable modem.
Optionally connect the DMZ interface to your DMZ network.
You can use a DMZ network to provide access from the Internet to a web server or other server without installing the servers on your internal network.
Configuring the networks
If you are running the FortiGate unit in NAT/Route mode, your networks must be configured to route all Internet traffic to the IP address of the interface where the networks are connected.
•For the internal network, change the default gateway address of all computers and routers connected directly to your internal network to the IP address of the FortiGate internal interface.
•For the DMZ network, change the default gateway address of all computers and routers connected directly to your DMZ network to the IP address of the FortiGate DMZ interface.
•For the external network, route all packets to the FortiGate external interface.
If you are using the FortiGate unit as the DHCP server for your internal network, configure the computers on your internal network for DHCP.
Make sure the connected FortiGate unit is functioning properly by connecting to the Internet from a computer on the internal network. You should be able to connect to any Internet address.
42 | |
